Bedienungsanleitung Kenwood KDC-W7541U (Seite 16 von 32) (Englisch)

62648

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY

Other Functions

Now, you can use the unit.

⁄

• If an incorrect code is entered, “Waiting” is displayed, and

the input prohibition periods shown in the table below

is generated.

After the input prohibition time lapses, “SECURITY” is

displayed, and you can reenter the code.

Number of times the

incorrect code was input

Input prohibited time

1—

2 5 minutes

3 1 hour

4 24 hours

Security Code

When Security Code is set, possibility of theft

is reduced because input of Security Code is

prompted to turn on the unit once it is turned off.

⁄

• When you activate the Security Code function, it cannot be

released.

Note, your Security Code is the 4 digit number entered in

your “Car Audio Passport” in this package.

1 Select Security Code item during Menu

mode (In Standby mode)

“Security Set” is displayed.

For how to select Function Control items, refer to

<Function Control> (page 6).

2 Enter Security Code mode

Press the Control knob for at least 1 second.

When “Enter” is displayed, “SECURITY SET” is also

displayed.

3 Enter Security Code

Operation type Operation

Select the digits to enter Push the Control knob towards right

or left.

Select the Security Code

numbers

Turn the Control knob or push it

towards up or down.

4 Confirm the Security Code

Press the Control knob for at least 3 seconds.

When “Re-Enter” is displayed, “SECURITY SET” is also

displayed.

5 Do the step 3 through 4 operation, and reenter

the Security Code.

“Approved” is displayed.

The Security Code function activates.

⁄

• If you enter a Code different from your Security Code,

you have to start over from step 3.

6 Exit Security Code mode

Press the [FNC] button.

Entering Security Code

The Security Code is required to use the audio unit

when the unit is first used after removed from the

battery power source or the Reset button is pressed.

1 Turn the power ON.

2 Do the step 3 through 4 operation, and reenter

the security code.

“Approved” is displayed.

Manual Clock Adjustment

1 Select Clock Adjustment item during Menu

mode (In Standby mode)

Select the “Clock Adjust” display.

For how to select Function Control items, refer to

<Function Control> (page 6).

2 Enter Clock adjustment mode

Press the Control knob for at least 1 second.

The clock display blinks.

3 Adjusting Clock

Operation type Operation

Selecting the item (hours or

minutes)

Push the Control knob towards right

or left.

Adjust each item Turn the Control knob or push it

towards up or down.

4 Exit Clock adjustment mode

Press the [FNC] button.

⁄

• You can do this adjustment when “MENU” > “SYNC” in

<Function Control> (page 6) is set to “OFF”.

B64-4049-00_00_E_English.indd 16B64-4049-00_00_E_English.indd 16 08.2.5 4:25:05 PM08.2.5 4:25:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-W7541U Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-W7541U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info