Bedienungsanleitung Kenwood kdc w7544u (Seite 35 von 56) (Englisch)

168520

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English

Bluetooth Setup

Registering Bluetooth device

To make your Bluetooth device (cell-phone) usable

with this unit, you need to register it (pairing). You

can register up to five Bluetooth devices to this unit.

When registering from Bluetooth devices

1 Turn on the control unit.

2 Start registering a unit by operating the

Bluetooth device

By operating the Bluetooth device, register the

hands-free unit (pairing). Select “KENWOOD BT

CD/R-2P2”/ “KENWOOD BT200” from the list of

connected units.

3 Enter a PIN code

Input the PIN code registered as mentioned in

<Registering PIN Code> (page 36).

Check that registration is complete on the

Bluetooth device.

4 By operating the Bluetooth device, start hands-

free connection.

When registering from this unit

1 Select Bluetooth device registration mode

Select “MENU” > “Device Regist”.

For how to select Function Control item, refer to

<Function Control> (page 6).

2 Enter Bluetooth device registration mode

Press the Control knob for at least 1 second.

Search for the Bluetooth device.

When search is completed, “Finished” is displayed.

3 Select the Bluetooth device

Turn the Control knob and push the center

when the desired Bluetooth device is displayed.

4 Input the PIN code

Operation type Operation

Select the numbers. Turn the Control knob or push it towards

up or down.

Move to the next digit. Push the Control knob towards right.

Delete the last digit. Push the Control knob towards left.

5 Transmit the PIN code

Press the Control knob for at least 1 second.

If “Pairing Success” is displayed, registration is

completed.

6 Return to the device list

Press the Control knob.

7 Exit Bluetooth device registration mode

Press the [FNC] button.

⁄

• This unit allows up to eight digits to be input for a PIN

code. If a PIN code cannot be input from this unit, it can

be input from the Bluetooth device.

• If there are 5 or more Bluetooth devices registered, you

cannot register a new Bluetooth device.

• If the error message appears even though the PIN code

is correct, try <Registering Special Bluetooth device>

(page 35).

Registering Special Bluetooth device

Allow registration of a special device that cannot be

registered normally (pairing).

1 Select Special device registration mode

Select “MENU” > “SPCL DVC Select”.

For how to select Function Control item, refer to

<Function Control> (page 6).

2 Enter Special device registration mode

Press the Control knob for at least 1 second.

A list is displayed.

3 Select a device name

Turn the Control knob and push the center

when the desired device name is displayed.

If “Completed” is displayed, registration is

completed.

4 Go through the procedure of <Registering

Bluetooth device> (page 35) and complete the

registration (pairing).

Cancelling Special device registration mode

Press the [FNC] button for at least 1 second.

⁄

• If the device name is not in the list, select “Other Phones”.

Function of KDC-BT8044U/ KDC-BT8044UY

KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UY with KCA-BT200 (Optional Accessory)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood kdc w7544u Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood kdc w7544u

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info