Bedienungsanleitung Kenwood kdc-w8534 (Seite 5 von 60) (Englisch)

163719

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

Notes

• If you experience problems during installation,

consult your Kenwood dealer.

• When you purchase optional accessories, check

with your Kenwood dealer to make sure that they

work with your model and in your area.

• If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when

the Reset button is pressed.

• Press the reset button if the disc auto changer fails

to operate correctly. Normal operation should be

restored.

• Characters that conform to ISO 8859-1 can be

displayed.

• Characters that conform to ISO 8859-5 or ISO

8859-1 can be displayed. Refer to <Selecting

Russian Characters> (page 44). (Russian sales area

of KDC-W8534)

• The RDS feature won’t work where the service is

not supported by any broadcasting station.

• There are places in this manual where lit

indicators are described; however, the only time

an indicator will light is in the following settings.

When Indicator is selected as mentioned in <Text

Display Switching> (page 22).

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on

the display on the actual equipment, and some

of the illustrations on the display may represent

something impossible in actual operation.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe it again with a clean soft dry cloth.

• Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty,

wipe them with a dry, soft cloth.

Before using this unit for the first time

This unit is initially set on the Demonstration mode.

When using this unit for the first time, cancel the

<Demonstration mode Setting> (page 46).

About ODD (Offset Dual Differential) D/A

System

The high quality sound play is to be done by ODD

D/A System. Dual D/A converters are built-in the

ODD D/A System, and the digital processing is

isolated and controlled separately for front channel

so the channel separation is improved sharply.

Also, the ODD D/A System produces the data by

which the sound data is offset on the minus side

and converts the two signals (original and offset

data) to the analog signal, which has less noise and

distortion, by the synthetic process.

However, ODD D/A System will be disabled if the

following settings are selected.

- When "2 ZONE" of <Audio Setup> (page 12)is

"ON".

- When <Bypass Control> (page 16) is "Bypass".

About DAB Tuner control

Refer to A group on the Instruction manual of DAB

Tuner KTC-9090DAB (optional accessory) for the

control method of DAB Tuner function.

However, the following control methods of the

function for this unit may be different from the

Instruction manual; therefore, refer to the following

supplemental instruction.

1. Select the preset band for Auto Ensemble

Memory Entry.

2. Press the [AME] button for at least 2 seconds.

Open Auto Ensemble Memory Entry.

After storing in the memory finishes, the

number of the pre-set buttons and the

ensemble label are displayed.

and <Languages to be displayed> in

At the operation to press [DISP] button, use [TI]

button instead.

Reset button

B64-3304-00_01_E_English.indd 5B64-3304-00_01_E_English.indd 5 05.11.15 2:35:34 PM05.11.15 2:35:34 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood kdc-w8534 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood kdc-w8534

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info