Bedienungsanleitung Kenwood kdc-w8534 (Seite 15 von 60) (Englisch)

163719

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

Equalizer Control

Select the source to adjust

Press the [SRC] button.

2 Select the key function section

Press the [NEXT] button.

Repeatedly press the button until "EQ" is

displayed above the [3] button.

Refer to <Notes on Multi-function Key System>

(page 9).

3 Enter Equalizer Control mode

Press the [3] ("EQ") button.

• When "2 ZONE" of <Audio Setup> (page 12) is ON,

you cannot select "EQ".

4 Select the Equalizer Control item to adjust

Press a [1] — [3]/[5] button.

Multi-function key operation Equalizer Control Item

[1] "SYS.Q" System Q Setting

[2] "F" Equalizer Front Setting

[3] "R" Equalizer Rear Setting

[5] "Preset" [1] "RCL"

[2] "MEM"

Recall mode

Memory mode

• "Preset": You can store an adjusted equalizer control

value by selecting "MEM". Refer to <Memory

mode> (page 17). Also, you can recall it by

selecting "RCL". Refer to <Memory Recall

mode> (page 17).

5 Adjust the Equalizer control item

System Q Setting (Sound Type)

Push the Control knob towards [4] or

[¢].

Each time you push the knob, the setting

alternates between the settings shown in the

table below.

Sound setting Display

User memory "USER"

Natural "NATURAL"

Rock "ROCK"

Pops "POPS"

Easy "EASY"

Top 40 "TOP 40"

Jazz "JAZZ"

• User memory:

The values set on the <Audio Control> (page 11).

• Change each setting value with the <Sound

Management system> (page 14).

First, select the speaker type with the Speaker setting.

Equalizer Front Setting/

Equalizer Rear Setting

1 Select a frequency band you wish to adjust.

Press the [2] ("F") or [3] ("R") button.

Each time you press the button, the band

alternates between "Band 1" and "Band 4".

2 Select the items to adjust for Equalizer.

Push the Control knob towards [FM] or [AM].

Each time you push the knob, the item to be

adjusted alternates between the items shown

in the table below.

3 Adjust the Equalizer.

Push the Control knob towards [4] or

[¢].

Each time you push the knob, the setting

alternates between the settings shown in the

table below.

Equarizer adjustment item Range

Equalizer Front Frequency/

Equalizer Rear Frequency

Refer to the followings.

Equalizer Front Level/

Equalizer Rear Level

–9 — +9

Equalizer Front Quality/

Equalizer Rear Quality

0.25/ 0.50/ 1.00/ 2.00

• The frequency which can be selected by each

Frequency band is shown below.

Band Frequency

Band1 60/ 80/ 100/ 120/ 160/ 200 Hz

Band2 250/ 315/ 400/ 500/ 630/ 800/ 1k Hz

Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 kHz

Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 kHz

• To get the best sound, first set the Cabin Setting

and Speaker Select Front/Rear parameters using the

<Sound Management system> (page 14).

6 Exit Equalizer Control mode

Press the [6] ("RTN") button.

B64-3304-00_01_E_English.indd 15B64-3304-00_01_E_English.indd 15 05.11.15 2:35:43 PM05.11.15 2:35:43 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood kdc-w8534 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood kdc-w8534

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info