Bedienungsanleitung Kenwood KDV-5241UY (Seite 42 von 55) (Englisch)

68692

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

42 | KDV-5241U

More about this unit

FM RDS operations

• Network-Tracking Reception requires two types of

RDS signals—PI (Programme Identification) and AF

(Alternative Frequency) to work correctly. Without

receiving these data correctly, Network-Tracking

Reception will not operate correctly.

• If a Traffic Announcement is received by TA Standby

Reception, the volume level automatically changes

to the preset level (TI Vol) if the current level is lower

than the preset level.

• When Alternative Frequency Reception is activated

(with AF selected), Network-Tracking Reception is

also activated automatically. On the other hand,

Network-Tracking Reception cannot be deactivated

without deactivating Alternative Frequency

Reception. (See page 15.)

• TA Standby Reception and PTY Standby Reception

will be temporarily canceled while listening to an AM

station.

• If you want to know more about RDS, visit

<http://www.rds.org.uk>.

Disc operations

General

• In this manual, words “track” and “file” are

interchangeably used.

• This unit can only play back audio CD (CD-DA) files if

different type of files are recorded in the same disc.

Inserting a disc

• When a disc is inserted upside down, “Please Eject”

appears on the display. Press OPEN, then 0 to eject

the disc.

Ejecting a disc

• If the ejected disc is not removed within 15 seconds,

the disc is automatically inserted again into the

loading slot to protect it from dust. Playback starts

automatically.

Basic operations

Turning on the power

• By pressing SOURCE on the unit, you can also turn on

the power. If the source is ready, playback also starts.

Turning off the power

• If you turn off the power while listening to a track,

playback will start from where it had been stopped

previously next time you turn on the power.

General

• If you change the source while listening to a disc,

playback stops.

Next time you select “DISC” as the playback source,

playback will start from where it had been stopped

previously.

• After ejecting a disc or removing a USB device,

“No Disc” or “No USB” appears and you cannot

operate some of the buttons. Insert another disc,

reattach a USB device, or press SOURCE to select

another playback source.

Tuner operations

Storing stations in memory

• During SSM search...

– All previously stored stations are erased and the

stations are stored anew.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in No. 1 will

be automatically tuned in.

• When storing a station manually, the previously

preset station is erased when a new station is stored

in the same preset number.

B64-4246-08_00_KDV5241U_en.indb 42B64-4246-08_00_KDV5241U_en.indb 42 08.5.16 1:48:56 PM08.5.16 1:48:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDV-5241UY Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDV-5241UY

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info