Bedienungsanleitung Kenwood kdv 5244u (Seite 10 von 44) (Englisch)

168662

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

KDV-5244U/ KDV-5544U/ KDV-4244/ KDV-4544

Displayed item is depending on currently selected

source or mode. The mark in Condition column

shows the condition to which the item is displayed.

: Can be set in other than standby state.

: Can be set in standby state.

: Can be set only during playback of the iPod source.

(USB source used when the iPod is connected)

: Can be set during DVD source.

: Can be set during Tuner source.

: Can be set during FM reception.

: Can be set while accessing AV IN or AUX source.

: Can be set for sources other than the standby

source by setting “2ZON” of <Audio Setup> (page

27) to “ON”.

— : Can be set during all sources.

⁄

• Refer to the respective page for information on how to

set the items with reference page number.

• Only the items available to the current source are

displayed.

*Factory setting

Function of KDV-5244U/ KDV-5544U

Function of KDV-5544U/ KDV-4544

Function Control/ Setup Menu

Function Control

Functions in the table below can be set up by using Function Control.

1 Enter Function Control mode

Press the [

] button for at least 1 second.

“FUNCTION” is displayed.

2 Select your desired setup item

Operation type Operation

Movement between items Turn the [AUD] knob.

Selection of item Press the [AUD] knob.

Return to previous item

Press the [

] button.

Repeat selection and determination until your

desired setup item is selected.

In this manual, the above selection is indicated as

Press [ ] 1sec., and select “MENU” > “ICON”.

Category Function of setup item Condition

“iPodCTRL”*

Allows you to set up iPod Control by Hand

Mode.

“DSP” Allows you to set up the sound environment.

“MENU” Allows you to set up the environment. —

“RETURN” Exit Function Control mode. —

3 Make a setting

Press the [AUD] knob or turn the [AUD] knob to

select a setting value, and then press the [AUD]

knob.

• The value of items with [AUD] mark can be set by

pressing the [AUD] knob.

• The value of items with [4/ ¢] mark can be

set by pressing the [4] or [¢] button.

• Some items require you to keep pressing the

[AUD] knob for 1 or 2 seconds to set. For these

items, the time during which you need to keep

pressing the [AUD] knob is displayed in the Entry

column in seconds.

4 Exit Function Control mode

Press the [ ] button for at least 1 second.

“MENU”

Item Setting Entry Setting overview Condition Page

“CODE SET”/

“CODE CLR”

1 sec.

Sets/Resets security code.

“SYNC” “OFF”/ “ON”*

Synchronizes the RDS station time data and this unit’s clock.

—

“DIM” “OFF”*/ “ON”

Adjusts the brightness of the display according to the

surrounding illumination.

——

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood kdv 5244u Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood kdv 5244u

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info