Bedienungsanleitung Kenwood kdv 5244u (Seite 33 von 44) (Englisch)

168662

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

English

Appendix

For operating KCA-BT200 (Optional)

For operation refer to Model-A-1 in the Instruction

Manual of KCA-BT200, and the table below. The

[AUTO]/[TI] button should be replaced with [SRC]

button for <Answering the Waiting Call after

Terminating>.

Set the remote controller mode switch to “AUD” mode

before starting operation.

Notation used in the KCA-BT200

Instruction Manual

Operation

[38] button [AUD] knob*

Control knob [AUD] knob

[AUTO]/[TI] button [DISP] button

Control knob towards up or down [FM+] or [AM–] button

Control knob towards left or right [4] or [¢] button

Use the [38] button for the operation of <Switching to the

Private Mode>.

For operating KCA-BT100 (Optional)

To control KCA-BT100, operate as follows;

To make setting for <Selecting the Dialing Mode>,

select <Function Control> (page 10). Pressing the

[AUD] knob for at least 1 second after selecting

the "D.MODE" item allows you to enter the dialing

method selection mode. To exit from dialing method

selection mode, press Search button.

To make <Disconnecting a Call>, <Clearing the

Disconnection Message>, and <Rejecting an

Incoming call>, press [DISP] button for at least 1

second.

Set the remote controller mode switch to “AUD” mode

before starting operation.

Moreover, some displays are different from the

description of KCA-BT100 Instruction Manual.

Displays of KCA-BT100 Instruction

Manual

Actual displays on this unit

“DISCONCT” “HF D-CON”

“CONNECT” “HF CON”

“PHN-DEL” “DVC-DEL”

“P-STATUS” “D-STATUS”

“BT-CON Y” “HF-CON Y”

“BT-CON N” “HF-CON N”

Function Glossary

• “AF” (Alternative Frequency)

When the reception is poor, automatically alternate

to another frequency broadcasting the same

program in the same RDS network with better

reception.

• “AUTO1”, “AUTO2”, “MANUAL” (Tuning mode

select)

Select a tuning mode of the radio.

Tuning mode Display Operation

Auto seek “AUTO1” Automatic search for a station.

Preset station seek “AUTO2” Search in order of the stations in the

Preset memory.

Manual “MANUAL” Normal manual tuning control.

• “AVIN” (Audio/ visual input)

When this is set to ON, AV input source can be

selected.

ON1: Allows AV input source to be selected. Use

this setting when the built-in AV IN terminal is

connected to the external equipment all the

time.

ON2: Activates the attenuator function when

turning on the power with AV input source

selected. Cancel the attenuator function

by turning the volume knob clockwise

when listening to the audio of the external

equipment.

OFF: Disable AV input source selection. Use this

setting when the built-in AV IN terminal is not

used.

• DTA (Digital Time Alignment)

Make fine adjustment of the delay time of the

speaker output specified at <Cabin selection>

(page 29) to have a more suitable environment for

your vehicle.

The settings of the delay time are automatically

identified and compensated by specifying the

distances of each speaker from the center of the

vehicle interior.

1 Set the front and rear positions and the height

of the reference point to the position of the ears

of the person sitting in the front seat, and set

the right and left positions to the center of the

vehicle interior.

2 Measure the distances from the reference point

to the speakers.

3 Calculate the distance difference in accordance

with the farthest speaker.

Next page 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood kdv 5244u Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood kdv 5244u

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info