Bedienungsanleitung Kenwood KHH326 MultiOne (Seite 12 von 270) (Alle Sprachen)

630843

Zoom out

Zoom in

Vorherige Seite

1/270

Nächste Seite

to use the cutting discs

Fit the bowl on the power unit, add the detachable

drive shaft.

2 Hold by the centre grip, place the disc onto the

rive shaft with the appropriate side uppermost.

3 Fit the lid.

4 Put the food in the feed tube.

5 Switch on, then push down evenly with the pusher

– never put your fingers in the feed tube.

hints

Use fresh ingredients.

Do not cut food too small. Fill the width of the feed

tube fairly full. This prevents the food from slipping

sideways during processing.

Food placed upright comes out shorter than food

placed horizontally.

There will always be a small amount of waste on

the disc or in the bowl after processing.

citrus juicer

Use the citrus juicer to squeeze the juice from

citrus fruits (e.g. oranges, lemons, limes and

grapefruits).

cone

sieve

to use the citrus juicer

1 Fit the bowl onto the power unit, add the

detachable drive shaft.

2 Fit the sieve into the bowl – ensuring the sieve

handle is locked into position directly over the bowl

handle

3 Place the cone over the drive shaft turning until it

drops all the way down

4 Cut the fruit in half. Then switch on and press the

fruit onto the cone.

The citrus juicer will not operate if the

sieve is not locked correctly.

For best results store and juice the fruit at room

temperature and hand roll on a worktop before

juicing.

To help with juice extraction move the fruit from

side to side when juicing.

When juicing large quantities, empty the strainer

regularly to prevent the build up of pulp and seeds.

glass blender

iller cap

goblet

ealing ring

lade unit

to use your glass blender

1 Fit the sealing ring

into the blade unit

ensuring the seal is located correctly in the grooved

area.

Leaking will occur if the seal is damaged

or incorrectly fitted.

2 Screw the goblet onto the blade assembly

Refer to the graphics on the underside of the blade

unit as follows:

- unlocked position

- locked position

The blender will not operate if incorrectly

assembled.

3 Put your ingredients into the goblet.

4 Fit the lid to the goblet and push down to secure

. Fit the filler cap.

5 Remove the dual drive outlet cover by turning it

anti-clockwise and lifting off.

6 Place the blender onto the power unit, and turn

clockwise

until it clicks into position.

The appliance will not operate if the

blender is incorrectly fitted to the

interlock.

7 Select a speed (refer to recommended speed

chart) or use pulse

for short bursts.

hints

When making mayonnaise, put all the ingredients,

except the oil, into the blender. Remove the filler

cap. Then, with the appliance running, add the oil

slowly through the hole in the lid.

Thick mixtures, e.g. pâtés and dips, may need

scraping down. If the mixture is difficult to process,

add more liquid.

Ice crushing – operate the pulse in short bursts

until crushed to the desired consistency.

The processing of spices is not recommended as

they may damage the plastic parts.

The appliance will not work if the blender

is incorrectly fitted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KHH326 MultiOne Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info