Bedienungsanleitung Kenwood KM245 Prospero (Seite 8 von 182) (Alle Sprachen)

630854

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

●

odel AT283 never blend more than 1.2 litres (2

ints 2fl oz) - less for frothy liquids like milk shakes.

●

Smoothie recipes - never blend frozen ingredients that

have formed a solid mass during freezing, break it up

efore adding to the blender.

key 

crylic blender AT282

 lid

 filler cap



goblet

 sealing ring

 blade unit

glass blender AT283

 filler cap

 lid



goblet

 sealing ring

 blade unit

 base

to use your acrylic blender AT282

1 Ensure the sealing ring is correctly fitted on the blade

unit.

2 Hold the underside of the blade unit and insert the

blades into the base of the blender. Twist to lock the

assembly firmly in place.

3 Put your ingredients into the goblet.

4 Fit the lid to the goblet and twist clockwise into place,

making sure that the tab on the lid slots into the

groove in the handle. When correctly fitted the

markings should align .

5 Place the filler cap into the lid.

6 Remove the high speed outlet cover by turning anti

clockwise and lifting off

.

7 Place the blender over the outlet, handle towards the

back and turn clockwise to lock firmly into place.

8 Switch to maximum speed.

9 Once the desired consistency has been achieved,

switch off and unplug.

10Remove the blender.

11Refit the high speed outlet cover after use.

to use your glass blender AT283

Ensure the sealing ring is correctly fitted on the blade

nit.

2 Fit the blade unit inside the base.

Screw the glass goblet onto the base.

Put your ingredients into the goblet.

5 Fit the lid and push down to secure.

Place the filler cap into the lid and push down to

secure.

7 Remove the high speed outlet cover by turning anti

clockwise and lifting off

.

8 Place the blender onto the outlet, handle towards the

back. Turn the blender clockwise to lock firmly into

place until the two arrows align .

9 Switch to maximum speed.

10Once the desired consistency has been achieved,

switch off and unplug.

11Remove the blender.

12Refit the high speed outlet cover after use.

hints

●

To prevent leaks make sure the base is locked firmly

into the goblet.

●

When making mayonnaise, put all the ingredients,

except the oil, into the blender. Then, with the

machine running, remove the filler cap and add the oil

slowly and evenly.

●

Thick mixtures, eg pâté, dips: use low to medium

speed, scraping down when necessary. If it’s difficult

to process, add more liquid. Alternatively use the

pulse setting to get the ingredients moving over the

blades.

care and cleaning

●

Always switch off and unplug before removing the

attachment from the kitchen machine.

●

Dismantle the attachment fully before cleaning.

●

Empty the goblet before unlocking the base.

blade unit

1 Remove and wash the sealing ring.

2 Brush the blades clean under the tap. Keep the

underneath of the unit dry.

3 Leave to dry.

other parts

Wash by hand in hot, soapy water.

Alternatively the filler cap, lid, base and glass blender

can be washed in your dishwasher.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KM245 Prospero Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info