Bedienungsanleitung Kenwood KMM-BT206 (Seite 26 von 164) (Deutsch, Englisch, Holländisch, Französisch)

699479

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Make a call

You can make a call from the call history, phonebook, or dialing the number.

Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode.

“(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch to the

other phone.

“(Second device name)” appears.

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[CALL HISTORY] (Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

• “I” indicates call received, “O“ indicates call made, “M” indicates call

missed.

• Press DISP to change the display category (NUMBER or NAME).

• “NO DATA” appears if there is no recorded call history or call number.

Press the volume knob to call.

Bluetooth®

[PHONE BOOK] (Applicable only if the phone supports PBAP.)

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

), press 2 /

• To select the desired first letter, turn the volume knob or press

, then press the knob.

Select “1” to search with numbers and select “

” to search with symbols.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to

call.

• For using phonebook with this unit, make sure to allow access to or transfer

from your smartphone. Depending on the connected phone, the process

may be different.

• Contacts are categorized as: HM (home), OF (office), MO (mobile),

OT (other), GE (general)

• This unit can display only non-accent letters. (Accent letters such as “Ú” are

shown as “U”.)

[NUMBER DIAL]

Turn the volume knob to select a number (0 to 9) or character ( , #, +).

Press

to move the entry position.

Repeat step 1 and step 2 until you finish entering the phone number.

Press the volume knob to call.

(or using the remote control)

Press the number buttons (0 to 9) to enter the phone number.

Press to call.

[VOICE] Speak the name of the contact you want to call or the voice command to

control the phone functions. (See also “Make a call using voice recognition”

on page 19.)

[LOW]/[MID]/[FULL]: Shows the strength of the battery.*

[NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.*

* Functionality depends on the type of the phone used.

JS_KWD_KMM_BT356_EN_EN.indd 18JS_KWD_KMM_BT356_EN_EN.indd 18 6/21/2019 4:01:20 PM6/21/2019 4:01:20 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KMM-BT206 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info