Bedienungsanleitung Kenwood KMM-BT504DAB (Seite 22 von 116) (Deutsch, Englisch, Italienisch)

672767

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Make a call using voice recognition

Press and hold to activate the voice recognition of the

connected phone.

2 Speak the name of the contact you want to call or the voice

command to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the

instruction manual of the connected phone for details.

• This unit also supports the intelligent personal assistant function of

iPhone.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode.

2 Turn the volume knob to select

[CALL HISTORY]

[PHONE BOOK]

, or

[NUMBER DIAL]

, then press the knob.

3 Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6).

“STORED” appears when the contact is stored.

To erase a contact from the preset memory, select

[NUMBER DIAL]

in step 2

and store a blank number.

Make a call from memory

Press to enter Bluetooth mode.

2 Press one of the number buttons (1 to 6).

3 Press the volume knob to call.

“NO MEMORY” appears if there is no contacts stored.

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

BT MODE

PHONE SELECT

Selects the phone or audio device to connect or disconnect.

“

” appears in front of the device name when connected.

“

” appears in front of the current playback audio device.

•

You can only connect a maximum of two Bluetooth phones and one

Bluetooth audio device at any time.

AUDIO SELECT

DEVICE DELETE

Turn the volume knob to select a device to delete, then press the knob.

Turn the volume knob to select

[YES]

[NO]

, then press the knob.

PIN CODE EDIT

(0000)

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press

/

to move the entry position.

Repeat steps

and

until you finish entering the PIN code.

Press the volume knob to confirm.

RECONNECT ON

:The unit automatically reconnect when the last connected Bluetooth

device is within range.;

OFF

:Cancels.

AUTO PAIRING ON

:The unit automatically pair supported Bluetooth device (iPhone/

iPod touch/Android device) when it is connected through USB input

terminal.Depending on the operating system of the connected device,

this function may not work. ;

OFF

:Cancels.

INITIALIZE YES

:Initializes all the Bluetooth settings (including stored pairing,

phonebook, and etc.).;

:Cancels.

BLUETOOTH®

JS_KWD_KMM_BT504DAB_EN_EN_1.indd 18JS_KWD_KMM_BT504DAB_EN_EN_1.indd 18 9/26/2017 2:19:16 PM9/26/2017 2:19:16 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KMM-BT504DAB Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KMM-BT504DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info