Bedienungsanleitung Kenwood KMR-440U (Seite 28 von 45) (Englisch)

606323

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

KDC-X494/ KDC-MP445U/ KMR-440U

Operation of hands-free phoning

Before Use

• For details on the Bluetooth cell-phone with the

hands-free function, see <About the Cell-Phone>

(page 40).

• You need to register your cell-phone before using

it with this unit. For more details, see <Registering

Bluetooth device> (page 32).

• If you have registered two or more cell-phones,

you need to select one of them. For more details,

see <Selecting the Bluetooth device You Wish to

Connect> (page 34).

• To use the Phone Book, it must be downloaded to

this unit in advance. For details, see <Downloading

the Phone Book> (page 33).

Function of KCA-BT200 (Optional Accessory)

Receiving a call

Answering a Phone Call

Press the [ENTER] button.

⁄

• The following operations disconnect the line:

- Insering a CD.

- Connecting a USB device.

• The name of the calling party is displayed if it has already

been registered in the Phone Book.

Rejecting an Incoming Call

Press the [SRC] button.

Calling a number in the Phone Book

Enter Bluetooth mode

Press the [FNC] button for at least 1 second.

“BT MODE” is displayed.

2 Select the Name search mode

Turn the Control knob to select “Name Search”,

and then press the [ENTER] button.

3 Enter the initial of name

Operation type Operation

Select the characters. Turn the Control knob.

Move the character page. Push the Control knob towards up or

down.

4 Search for the name

Press the [ENTER] button.

5 Select the phone number

Turn the Control knob.

Dialing a number

Enter Bluetooth mode

Press the [FNC] button for at least 1 second.

“BT MODE” is displayed.

2 Select the Number dial mode

Turn the Control knob to select “Number Dial”,

and then press the [ENTER] button.

3 Enter a phone number

Turn the Control knob to select number, and

then Push the Control knob towards right.

4 Make a call

Press the [ENTER] button.

To erase the entered phone number digit by

digit:

Push the Control knob towards left.

⁄

• You can input a maximum of 32 digits.

Calling a number in the call log

Enter Bluetooth mode

Press the [FNC] button for at least 1 second.

“BT MODE” is displayed.

2 Select the call log mode

Turn the Control knob to select “Incoming

Calls”, “Outgoing Calls”, or “Missed Calls”, and

then press the [ENTER] button.

“Incoming Calls”: Incoming calls

“Outgoing Calls”: Outgoing calls

“Missed Calls”: Missed calls

3 Select a name or phone number

Turn the Control knob.

Pushing the Control knob towards right or left sorts

the Phone Book by name.

6 Make a call

Press the [ENTER] button.

⁄

• Pressing [S.MODE] button each time switches between

name and telephone number.

• During search, a non-accent character such as “u” is

searched for instead of an accent character such as “ü”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KMR-440U Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KMR-440U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info