Bedienungsanleitung Kenwood KMR-M505DAB (Seite 23 von 124) (Deutsch, Englisch, Italienisch)

683040

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

[PHONE BOOK] (Applicable only if the phone supports PBAP.)

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

), press

2 /

• To select the desired first letter, turn the volume knob or press

, then press the knob.

Select “1” to search with numbers and select “

” to search with

symbols.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to

call.

• The phonebook of the connected phone is automatically transferred to

the unit when pairing.

• Contacts are categorized as: HM (home), OF (office), MO (mobile),

OT (other), GE (general)

• This unit can display only non-accent letters. (Accent letters such as “Ú”

are shown as “U”.)

[NUMBER DIAL]

Turn the volume knob to select a number (0 to 9) or character ( , #, +).

Press

to move the entry position.

Repeat steps 1 and 2 until you finish entering the phone number.

Press the volume knob to call.

[VOICE] Speak the name of the contact you want to call or the voice command to

control the phone functions. (See “Make a call using voice recognition”.)

[LOW]/[MID]/[FULL]: Shows the strength of the battery.*

[NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.*

* Functionality depends on the type of the phone used.

Make a call using voice recognition

Press and hold to activate the voice recognition of the connected

phone.

2 Speak the name of the contact you want to call or the voice command

to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the

instruction manual of the connected phone for details.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode.

2 Turn the volume knob to select

[CALL HISTORY]

[PHONE BOOK]

[NUMBERDIAL]

, then press the knob.

3 Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6).

“STORED” appears when the contact is stored.

To erase a contact from the preset memory, select

[NUMBER DIAL]

in step 2

and store a blank number.

Make a call from memory

Press to enter Bluetooth mode.

2 Press one of the number buttons (1 to 6).

3 Press the volume knob to call.

“NO MEMORY” appears if there is no contact stored.

JS_KWD_KMM_BT505DAB_EN_5th Draft.indd 17JS_KWD_KMM_BT505DAB_EN_5th Draft.indd 17 9/27/2018 9:25:32 AM9/27/2018 9:25:32 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KMR-M505DAB Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KMR-M505DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info