Bedienungsanleitung Kenwood kna-dv3200 (Seite 3 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

162114

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Safety precautions

To prevent injury and/or fire, take the

following precautions:

• Ensure that the unit is securely installed.

Otherwise it may fly out of place during

collisions and other jolts.

• When extending the ignition, battery or ground

cables, make sure to use automotive-grade

cables or other cables with an area of 0.75mm

(AWG18) or more to prevent cable

deterioration and damage to the cable coating.

•To prevent short circuits, never put or leave

any metallic objects (e.g., coins or metal tools)

inside the unit.

• If the unit starts to emit smoke or strange

smells, turn off the power immediately and

consult your Kenwood dealer.

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V

DC power supply.

• Do not open the top or bottom covers of the

unit.

• Do not install the unit in a spot exposed to

direct sunlight or excessive heat or humidity.

Also avoid places with too much dust or the

possibility of water splashing.

• Do not subject the faceplate to excessive

shock, as it is a piece of precision equipment.

• When replacing a fuse, only use a new one

with the prescribed rating. Using a fuse with

the wrong rating may cause your unit to

malfunction.

•To prevent short circuits when replacing a fuse,

first disconnect the wiring harness.

• During installation, do not use any screws

except for the ones provided. The use of

improper screws might result in damage to the

main unit.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it

with a dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain

off with a cloth moistened with neutral cleaner,

then wipe neutral detergent off.

Applying spray cleaner directly to the unit may

affect its mechanical parts. Wiping the

faceplate with a hard cloth or using a volatile

liquid such as thinner or alcohol may scratch

the surface or erases characters.

Lens Fogging

Right after you turn on the car heater in cold

weather, dew or condensation may form on

the lens in the DVD player of the unit. Called

lens fogging, DVDs may be impossible to play.

In such a situation, remove the disc and wait

for the condensation to evaporate. If after the

condensation has evaporated the unit still does

not operate normally, consult your Kenwood

dealer.

The marking of products using lasers

(Except for some areas)

The label is attached to the chassis/case and says

that the component uses laser beams that have

been classified as Class 1. It means that the unit

is utilizing laser beams that are of a weaker class.

There is no danger of hazardous radiation outside

the unit.

CLASS 1

LASER PRODUCT

2CAUTION

2WARNING

English-3

English

KNA-DV3200Inst(E) 03.5.8 2:41 PM Page 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood kna-dv3200 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood kna-dv3200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info