Adjust the bass boost level of the external amplifier using the
main unit.
Switching the bass boost level:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the External amp control
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "AMP BASS Flat/FLT", "AMP
BASS +6", or "AMP BASS +12" in the display, indicating that the
external amplifier bass boost level is flat, +6dB, or +12dB,
respectively.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
As of December 1998, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
NOTE
4
3
2
1
External Amp Control
Function of the KRC-PS1077R/KRC-977R/KRC-877R/KRC-877W
The following operation allows separate sound sources to
control the output of the front and rear speakers. The Dual zone
system can only be switched on or off when the source is set to
the AUX mode.
Turning the Dual zone system On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Dual zone system
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "Zone 2 ON" or "Zone 2
OFF" in the display, indicating that the Dual zone system
function is on or off, respectively.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
• You must purchase the optional KCA-S210A/CA-C1AX/KDC-
CPS82/KDC-CX82 device before you can use this function.
• You can choose to send the AUX input through the rear channel,
and the unit’s tuner or tape source through the front channel.
• The Bass, Treble and Loudness adjustments do not affect the
rear channel.
• When the Dual zone system is turned on, the External disc
control features cannot be used.
• When you set the Dual zone system to on whilst the non-fading
preout is switched on, the sound of the non-fading preout does
not be outputted.
NOTE
4
3
2
1
Dual Zone System
— 37 —
