Bedienungsanleitung Kenwood KRF-V4070D (Seite 22 von 36) (Englisch)

477379

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Using RDS

(Radio Data System)

RDS is a system that transmits useful information (in the form of digital

data) for FM broadcasts along with the broadcast signal. Tuners and

receivers designed for RDS reception can extract the information from

the broadcast signal for use with various functions, such as automatic

display of the station name.

RDS functions:

PTY (Program TYpe Identification) Search ∞

Automatically tunes to a station that is currently broadcasting the

specified program type (genre).

PS (Program Service Name) Display

Automatically displays the station name transmitted by the RDS

station.

RDS AUTO MEMORY function ¢

Automatically selects and stores up to 40 RDS stations in the preset

memory.

If fewer than 40 RDS stations have been stored in the preset memory,

regular FM stations will be stored in the remaining places.

Radio Text function

Displays the radio text data transmitted by some RDS stations when

you press the RDS DISPLAY key. There is “NO RT” display if no text

data is transmitted.

The “RDS” indicator lights up when an RDS broadcast (signal) is

received.

Note

Some functions and function names may differ for certain countries

and areas.

Before using a function utilizing the RDS, be sure to perform the RDS

Auto Memory operation by referring to the description in “Presetting

RDS stations (RDS AUTO MEMORY)”. ¢

Listening to radio broadcasts

The receiver can store up to 40 stations in the memory and recall them

by one-touch operation.

Radio stations can be classified into RDS (Radio Data System) stations

and other stations. To listen to or store RDS stations in the preset

memory see “Using RDS (Radio Data System)”.

Tuning (non-RDS) radio stations

“AM” or “FM” indicator

appears in the display

“AUTO” indicator lights

up in the display.

Use the INPUT SELECTOR knob or TUNER key to select the

tuner.

Use the BAND key to select the desired broadcast band.

Each press switches the band

as follows:

1 FM

2 AM

Use the AUTO key to select the desired tuning method.

Each press switches the tuning method as follows:

1 AUTO lit (auto tuning)

2 AUTO not lit (manual tuning)

• Normally, set to “AUTO” (auto tuning). If the radio waves are weak

and there is a lot of interference, switch to manual tuning. (With

manual tuning, stereo broadcasts will be received in monaural.)

Use the MULTI CONTROL knob or keys, or TUNING

keys to select the station.

Auto tuning : The next station is tuned automatically.

Manual tuning : Turn the knob (press the key) to select the desired

station.

Frequency

display

“TUNED” is displayed

when a station is received.

“ST.” lights when

a broadcast is being

received in stereo.

MULTI CONTROL

INPUT SELECTORBAND

AUTO

MULTI

CONTROL

TUNER

AUTO

BAND

TUNING

*5339/22-25/EN 10/1/03, 8:35 PM22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KRF-V4070D Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KRF-V4070D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info