Bedienungsanleitung Kenwood KRF-V5200D (Seite 18 von 40) (Englisch)

67581

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

English

Speaker settings

Speaker setup ("SP SETUP")

This sets up the speakers according to the speaker system in

use. Speaker setup is required every time the speaker system is

changed.

œ See <Getting into the setup mode> (&) and

select "SP SETUP".

∑ Use [MULTI CONTROL 5/∞] to select the subwoofer

setting.

Speaker Display Selection

Subwoofer

"SUBW ON" With Subwoofer

"SUBW OFF" Without Subwoofer

é Press [SETUP].

® Repeat steps ∑ – é for the rest of the speaker

setting.

Speaker Display Selection

Front speaker

"FRNT LRG" Large size front speaker

"FRNT NML" Average size front speaker

Center speaker

"CNTR NML" Average size center speaker

"CNTR LRG" Large size center speaker

"CNTR OFF" No center speaker is connected.

Surround speaker

"SURR NML" Average size surround speaker

"SURR LRG" Large size surround speaker

"SURR OFF" No surround speaker is connected.

Subwoofer re-mix*

"RMX ON" Subwoofer re-mix is on.

"RMX OFF" Subwoofer re-mix is off.

* The function for adding the bass of other channels to the

subwoofer channel according to the speaker setup.

† Go to the next setting, "TEST TONE".

• If you wish to exit the setup mode, see <To exit the setup mode>

Notes:

• When "SUBW OFF" is selected, the front speakers are

automatically set to "FRNT LRG".

• For "FRNT LRG" selection, no sound will be heard from subwoofer

even it is set to ON. However, if you select "RMX ON", you will be

able to hear sound from the subwoofer.

• When in STEREO mode, the sound goes directly to front speakers.

• If "FRNT NML" is selected, "CNTR LRG" cannot be selected.

• If "CNTR NML" or "CNTR OFF" is selected, "SURR LRG" cannot be

selected.

Adjusting the speaker level

("TEST TONE")

From your usual listening position, adjust the volume output of

each speaker. The output level from each speaker should be the

same.

œ See <Getting into the setup mode> (&) and

select "TEST TONE".

∑ Use [MULTI CONTROL 5/∞] to select either "AUTO"

or "MANUAL".

Display Selection

"AU TO "

The test tone is heard from the speakers one after another with

2 seconds each.

"MANUAL" The test tone is heard from the speaker you have selected.

é Press [SETUP].

® Adjust the output level.

If you select "AUTO":

When you hear the test tone from the speaker which

you wish to adjust, use [MULTI CONTROL 5/∞] and

adjust the volume of the test tone. When you finish

adjusting, press [SETUP].

If you select "MANUAL":

Use [MULTI CONTROL 5/∞] to adjust the volume of

the test tone and press [SETUP]. You will hear the

test tone from the next speaker.

† Go to the next setting, "DISTANCE".

• If you wish to exit the setup mode, see <To exit the setup mode>

B60-5676-00_00.indd 18B60-5676-00_00.indd 18 07.4.12 9:57:19 AM07.4.12 9:57:19 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KRF-V5200D Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KRF-V5200D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info