Bedienungsanleitung Kenwood KRF-V7060D (Seite 33 von 44) (Englisch)

40355

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

The remote control supplied with this receiver is also capable

of controlling components from a variety of manufacturers

once you register the appropriate setup codes into the

remote control unit.

Low battery warning

Replace all two batteries with new ones when you notice a shortening

of the distance from which the remote control will operate. After

changing the batteries, please re-enter the setup codes.

Registering setup codes for other components

SOURCE

Numeric keys

REMOTE MODE

INPUT

SELECTOR

Find the setup code of the component to be registered.

• Refer to the setup code lists to find the setup code for the

component to be registered. ﬁﬂ

Example: To register a DVD made by KENWOOD, you would enter

“805”.

Input Component Maker Code Key

(DVD) DVD player KENWOOD 805, 808 DVD

Registering components for REMOTE MODE [(DVD, CBL,

DSS/SAT, VCR, TV, OTHERS - RC-R0725/R0727) or (DVD, CD,

CBL/SAT, VCR, TV, OTHERS - RC-R0726)] keys.

1 For DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR or TV keys;

Hold down the SOURCE

key and press the numeric keys to

enter the setup code.

• Example: Press “805” to register a DVD player manufactured by

KENWOOD.

• If you push an invalid key, the remote control will exit the setup

mode.

2 The OTHERS key enables you to operate another DVD, CD,

CBL, DSS/SAT, CBL/SAT, VCR or TV component.

For OTHERS key;

Hold down the OTHERS key and press the numeric keys to

enter the setup code.

• Example: After you have registered the KENWOOD DVD player,

press “804” to register another DVD player which is manufactured

by Panasonic.

• If you push an invalid key, the remote control will exit the setup

mode.

Press any of the REMOTE MODE key and then press the

SOURCE key to check that the component you want to

control turns on.

If the component does not react, and there is more than one

setup code, enter another setup code and try again.

• If the component is already on, pressing the SOURCE

key will

turn it off.

Repeat steps

to register additional components until

all components have been registered.

Alternative REMOTE MODE key .

This operation is optional and is convenient when you link an INPUT

SELECTOR key to the REMOTE MODE key. While operating one

component, the INPUT SELECTOR key functions as an alternative

REMOTE MODE key to select another component.

• Example: REMOTE MODE (DVD) key can be linked to the INPUT

SELECTOR (VIDEO 1) key as described below;

1 After registering the setup code, press and hold the SOURCE

key and then press the REMOTE MODE (DVD) key.

2 While holding down the SOURCE

, press the INPUT

SELECTOR (VIDEO 1) key.

• Now the VIDEO 1 key will function as a DVD key which can be

selected at the same time while operating a CD player.

• Repeat step 1 to 2 to link other INPUT SELECTOR keys.

Note

Although each setup code is designed to work with a number of

different models, certain codes may not work with some models.

(Also, certain codes may only operate some of the functions available

on a given model.)

Basic remote control operations for other components

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KRF-V7060D Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KRF-V7060D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info