Bedienungsanleitung Kenwood KVT-827DVD (Seite 4 von 104) (Englisch)

465255

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

English

Before Use

2WARNING

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the unit.

• Do not touch the liquid crystal fluid if the LCD is damaged

or broken due to shock. The liquid crystal fluid may be

dangerous to your health or even fatal.

If the liquid crystal fluid from the LCD contacts your body or

clothing, wash it off with soap immediately.

2CAUTION

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V DC power

supply.

• Do not install the unit in a spot exposed to direct sunlight

or excessive heat or humidity. Also avoid places with too

much dust or the possibility of water splashing.

• Do not place the faceplate or the faceplate case in areas

exposed to direct sunlight, excessive heat or humidity. Also

avoid places with too much dust or the possibility of water

splashing.

• To prevent deterioration, do not touch the terminals of the

unit or faceplate with your fingers.

• Do not subject the faceplate to excessive shock, as it is a

piece of precision equipment.

• When replacing a fuse, only use a new fuse with the

prescribed rating. Using a fuse with the wrong rating may

cause your unit to malfunction.

• Do not use your own screws. Use only the screws provided.

If you use the wrong screws, you could damage the unit.

• You cannot view video pictures whilst the vehicle is moving.

To enjoy TV/video pictures, find a safe place to park and

engage the parking brake.

NOTE

• If you experience problems during installation, consult your

Kenwood dealer.

• If the unit fails to operate properly, press the Reset button

to restore factory settings.

Reset button

OPEN/CLOSE

ATT

DISP

Screen brightness during low temperatures

When the temperature of the unit falls such as during winter,

the liquid crystal panel's screen will become darker than usual.

Normal brightness will return after using the monitor for a

whilst.

Audio units you can control from the

KVT-827DVD Receiver (As of June, 2005):

KTC-V500E, KTC-9090DAB, KHD-C710, KDC-CPS89, KDC-CPS87,

KDC-CPS85, KDC-CPS82, KDC-C719, KDC-C717, KDC-C715,

KDC-C712, KDC-C669, KDC-C667, KDC-C665, KDC-C662,

KDC-C469, KDC-C467, KDC-C465, KDC-C462, KDV-C820,

KDC-C719MP, KDC-D301, KDC-D300, KMC-D400, KMD-D401

(Set the "O-N" switch to "N" position if provided.)

Navigation units you can control from the

KVT-827DVD Receiver (As of June, 2005):

KNA-DV3200, KNA-DV2200

Loading and Replacing the battery

1. Use two "R03"/"AAA"-size batteries.

Slide the cover while pressing

downwards to remove it as

illustrated.

2. Insert the batteries with the + and

- poles aligned properly, following

the illustration inside the case.

2WARNING

Store unused batteries out of the reach

of children. Contact a doctor immediately if the battery is

accidentally swallowed.

• Do not set the remote control on hot places such as above the

dashboard.

• The provided batteries are intended for use in operation

checking, and their service life may be short.

• When the remote controllable distance becomes short, replace

both of the batteries with new ones.

Cleaning the panel and monitor

When the operator panel and monitor panels are dirty, wipe

and clean them using a soft cloth (such as a commercially

available silicon coated cloth). When contaminated

excessively, clean them using a cloth dipped in a neutral

detergent first, then remove the detergent using a dry cloth.

Do not use a hard cloth and a volatile chemical (such as

an alcohol). If used, the panel surface may be scratched or

printed letters may be erased.

Cleaning the disc slot

As dust can accumulate in the disc slot, clean it occasionally.

Your discs can get scratched if you put them in a dusty disc

slot.

Lens Fogging

Right after you turn on the car heater in cold weather, dew

or condensation may form on the lens in the disc player of

the unit. Called lens fogging, discs may be impossible to

play. In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not operate

normally after a whilst, consult your Kenwood dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KVT-827DVD Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KVT-827DVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info