666929
9
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
9
CT-2050/203/KXF-W6010/W4010 (En/M)
Controls and indicators
1 Deck A
This deck is used exclusively for play-
back. (CT-203/KXF-W4010 only)
This deck is capable of both playback
and recording. (CT-2050/KXF-W6010
only)
2 Deck A eject (0) key 0
Press to open the cassette holder of
deck A.
3 Deck B eject (0) key 0
Press to open the cassette holder of
deck B.
4 Deck B
This deck is capable of both playback
and recording.
5 Deck A operation keys 0~!
1 :Rewind key (for fast winding of
tape toward the left reel seen
from you)
¡ :Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
2, 3 :Play keys
7 :Stop key (Stop)
6 POWER switch 0
Press to turn this unit ON and OFF.
7 PHONES jack !
Connect stereo headphones (optional)
here.
8 TIMER switch £
This switch is used in setting of timer
playback and timer recording.
9 MODE key ^
Press to change the recording
level,balance,or bias settings.
0 Deck B operation keys 0~!
2, 3 : Play keys
7 :Stop key (Stop)
1 :Rewind key (for fast winding of
tape toward the left reel seen
from you)
¡ :Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
PAUSE (
8) key !
:Press to let tape transport pause
temporarily.
REC/ARM (
) key ^
:Press in stop mode to start re-
cording or press in record mode
to let the recording pause after
leaving a non-recorded blank of
4 seconds.
! Deck A PAUSE (
8) key (CT-2050/
KXF-W6010 only) !
Press to let tape transport pause tem-
porarily.
@ Deck A REC/ARM (
) key (CT-2050/
KXF-W6010 only) ^
Press in stop mode to start recording or
press in record mode to let the record-
ing pause after leaving a non-recorded
blank of 4 seconds.
# RESET A key !
Press to reset the tape counter of deck
A to “0000”.
$ DOLBY NR key 0
Press to switch the Dolby Noise Reduc-
tion mode to B = C = OFF. This makes
it possible to use the Dolby NR effect in
recording and playback.
% REV. MODE key 0
Press to change the tape transport di-
rection.
^ RELAY REC key (CT-2050/KXF-W6010
only) (
Press to perform continuous recording
from deck A to deck B.
& DUBB. keys (NORM./HIGH) (CT-2050/
KXF-W6010 only) )
DUBBING keys (NORMAL/HIGH) (CT-
203/KXF-W4010 only) )
Press to start tape dubbing.
NORM./NORMAL
: Dubbing at the normal
speed.
HIGH : Dubbing at a high speed.
* MPX FILTER key &
Press to reduce beat noise when record-
ing FM broadcasts.
( CCRS key
Press to start recording after automatic
setting of the optimum CD recording
level and optimum tape recording bias.
) AUTO BIAS key ^
When this key is pressed, the bias level
appropriate for the tape is set automati-
cally for recording.
¡ RESET B key
Press to reset the tape counter of deck
B to “0000”.
REC LEVEL/BAL./BIAS knob (CT-
2050/KXF-W6010 only) ^
Adjust this before recording.
£ REC LEVEL/BAL. knob (CT-203/KXF-
W4010 only) ^
Adjust this before recording.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood KXF-W6010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info