666929
21
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
21
CT-2050/203/KXF-W6010/W4010 (En/M)
Start playing the CD.
Set the record-pause mode.
Adjust the recording level.
2
Press 7 key of the
CD player.
Press the 6 key
of the CD player.
1
Play a CD.
4
Put the CD player in stop
mode.
3
4
Press the 6 key of the CD player.
To pause : Press the 6 key of the CD player.
To restart recording : Press the 6 key of the CD player.
To stop : Press the 7 key of the CD player.
Preparation
÷ If the stop (7) key of the cassette deck is pressed, the cassette deck
enters the stop mode but the CD player does not stop.
: Keys and control used in the operations described on this page.
CD synchro recording
÷ Synchro recording is not possible when tracks of more than one CD are
programmed using a Carrousel type CD player.
÷ Recording starts at this moment.
÷ When the CD player has completed playback, the cassette deck stops
recording and enters the stop mode.
Convenient CD recording (CT-203/KXF-W4010; Deck B only)
By connecting this unit with a KENWOOD "f", "ƒ", " (ƒ)", type amplifier (receiver) with a SYSTEM CONTROL jack
and a KENWOOD CD player with a SYSTEM CONTROL jack using system control cords, recording on this unit and playback on
the CD player can be started simultaneously.
Since this unit is not designed for recording with metal (TYPE
) tapes, do not use metal tapes for recording.
1
Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)
÷ The optinum bias is set in about 40 seconds, after which the deck
enters stop mode.
÷ For a fine adjustment after setting AUTO BIAS, refer to the description
of "Bias level adjustment". (CT-2050/KXF-W6010 only)
&
÷To cancel the auto-bias adjustment operation in the middle, press
the stop (7) key.
÷ Recording is possible even when the auto-bias setting is omitted.
÷ While pressing the PAUSE (8) key, press the REC/ARM () key.
CT-2050/KXF-W6010
CT-203/KXF-W4010
1
Complete the connections referring to
"System connections".
6
2
Make “Playback (recording) preparation”.
0
(CT-203/KXF-W4010; Insert a tape in
deck B.)
3
(Load a disc in the CD player.)
AUTO BIAS
8
PAUSE
REC/ARM
8
PAUSE
REC/ARM
2
Set the record-pause mode.
÷ While pressing the PAUSE (8)
key, press the REC/ARM () key.
3
Adjust the recording balance
and recording level.
“How to record.”
^
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood KXF-W6010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info