62147
11
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
EN
11
Using the CD/MP3-CD/WMA-CD/USB device
Preparation
Loading a disc
1 Press CD/USB (CD/USB) button to select CD
mode.
2 Press (0) button to open the CD tray.
3 Place a disc into the tray with the label facing
up.
4 Press (0) button to close the CD tray.
For a CD, the total playtime and total number of
tracks will appear in the display.
For an MP3-CD and WMA-CD, the total album
number and total  le number will appear on the
display.
To remove the disc, press (0) button, grasp the disc by its
edges, and carefully pull it out.
Inserting a USB device
1 Press the button to select standby mode.
2 Insert a USB device to the USB connector on the
front panel.
3 Press CD/USB (CD/USB) button to select USB
mode.
To ensure good system performance; wait until the unit
completely reads the disc/USB device before proceeding.
If the disc compartment is not loaded with a disc, “NO DISC is
displayed. If the disc is unreadable, “ERR DISC” is displayed.
If the disc is unreadable or there is no playable audio  le in
the USB device, “NO DATA” is displayed.
For audio  les, reading time may exceed 10 seconds due
to the large number of songs compiled into one disc/USB
device.
For audio  les, A” on the display represents ALBUM.
For audio  les, the total album number on the display
indicates the number of all the albums recorded in the disc/
USB device.
The icon “MP3” appears only when an MP3- le is played.
The icon WMA appears only when an WMA- le is played.
Insert or remove the USB device while in the standby mode.
Sound may be interrupted when inserting or removing the
USB device. This may occur even when the sound is not
played or recorded from/to the USB device.
When playing or recording from/to the USB device, removing
it or turning the power o may corrupt the sound source and
get it unplayable.
Playing a disc/USB device
Press FWD PLAY 6 (6) button to start playback.
The track/ le number and elapsed playing time of
the current track/ le appear on the display.
To interrupt playback, press FWD PLAY 6 (6) button.
The playing time starts  ashing.
To resume playback, press FWD PLAY 6 (6) button
again.
To stop playback, press STOP 7 (7 stop) button.
Selecting a desired track/passage
To select a desired track
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button repeatedly until the desired
track appears on the display.
If playback is stopped, press FWD PLAY 6 (6) button to
start playback.
The digit buttons, 0–9 on the remote control unit can also be
used to select a track.
Press the digit buttons as shown below:
To select track 2 : 2 and ENTER
To select track 23 : 2, 3 and ENTER
To select track 120 (Audio  le only) : 1, 2 and 0
To search for a particular passage during
playback
Press and hold
SEARCH/TUNING 4 or ¢ (4 or
¢
search +/–
)
button for more than 3 seconds.
Press the FWD PLAY 6 (6) button when the
desired passage is located.
M-505USB_EN_r12.indd 11M-505USB_EN_r12.indd 11 07.8.29 4:44:43 PM07.8.29 4:44:43 PM
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

kenwood-m-505-usb

Suche zurücksetzen

  • Brauche für dieses Radio eine ANTENNE - wo erhalte ich diese? Eingereicht am 10-9-2019 11:10

    Antworten Frage melden
  • Brauche für dieses Radio eine ANTENNE - wo erhalte ich diese?
    edraeger@t-online.de Eingereicht am 10-9-2019 11:08

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood M-505 USB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood M-505 USB

Kenwood M-505 USB Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch, Spanisch - 120 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info