Bedienungsanleitung Kenwood M-718BT (Seite 13 von 18) (Englisch)

683122

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Use of the FM radio

Press the

button on the remote control or the

4. 5 mm

27 .0 m m

5. 8 mm

4. 3 mm

button on the main device until “FM”

appears on the display.

Setting a FM station

• Press the

TUN+

button on the remote control to increase the reception frequency.

• Press the

TUN-

button on the remote control to lower the reception frequency.

• If you hold down the

TUN+

TUN-

buttons, an automatic station scan starts which stops at the

rststationwhichisfound.

• Press the

Auto

button to start a station scan with automatic storage of the stations which are found.

A maximum of 30 stations will be stored in the order they were found.

• Press the

or buttons on the remote control or on the main device to scroll through the

memory list. Memory spaces which are unassigned will be indicated with “EMPTY“.

Use of Radio Data System (RDS)

RDSisatransmissionsystemwherebyFMstationtransmitotherusefulinformationalongwiththe

actual transmitter signal. This can be extracted from the normal transmitter signal and used for a range

of additional functions.

IfanRDSsignalisreceived,then”RDS” appears in the display below the frequency display and

after a while the station name and other information is displayed instead of the frequency.

RDS functions

The following information can be retrieved by repeatedly pressing the

RDS

button:

•Radiotext–Ifthestationisnotbroadcastinganyradiotext,then“NO TEXT” appears.

• PTY (Program Type) – If the station is not broadcasting any PTY signal, then “NO PTY” appears.

• Frequency and memory space of the station received

• Stereo / Mono display

• Time – If the station is not broadcasting any time signal, then “00_00_00” appears.

• Date – If the station is not broadcasting any date signal, then “00-00-00” appears.

Ifthereisinsufcientreceptionsignal,signalreceptioncanbedisturbedorimpossibledespite

showing “RDS” display.

Saving stations in station memory

Thereare30memoryspacesavailabletomakeiteasiertondFMstations.

To assign the memory, proceed as follows:

• Select a station to be saved

• Press the

PRG

buttonuntilastationmemoryspaceashesinthedisplay.Anemptymemoryspace

is indicated by “EMPTY”, an assigned space is shown with its frequency. You can also re-assign a

memory space which is already in use.

• Press the or buttons to select a memory space.

•Conrm or save using the

PROG

button.Thememoryspacewillnolongerbeashing.

• The stations can now be selected with the

or buttons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood M-718BT Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood M-718BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info