Bedienungsanleitung Kenwood M-819DAB (Seite 15 von 20) (Englisch)

683123

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Use of Radio Data System (RDS)

RDSisatransmissionsystemwherebyFMstationtransmitotherusefulinformationalongwiththeactual

transmitter signal. This can be extracted from the normal transmitter signal and used for a range of additional

functions.

IfanRDSsignalisreceived,then”RDS” appears in the display below the frequency display and after a while

the station name is displayed instead of the frequency.

RDS functions

The following information can be retrieved by repeatedly pressing the

INFO

button:

•Radiotext–Ifthestationisnotbroadcastinganyradiotext,then“NO TEXT” appears.

• PTY (Program Type) – If the station is not broadcasting any PTY signal, then “NO PTY” appears.

• Frequency and memory space of the station received

• Stereo / Mono display

•Time–Ifthestationisnotbroadcastinganytimesignal,then“00_00_00” appears.

•Date–Ifthestationisnotbroadcastinganydatesignal,then“00-00-00” appears.

Ifthereisinsufcientreceptionsignal,signalreceptioncanbedisturbedorimpossibledespiteshowingthe

“RDS” display.

Saving stations in station memory

Thereare20memoryspacesavailabletomakeiteasiertondFMstations.Toassignthememory,proceedas

follows:

• Select a station to be saved

• Press the

PRG

buttonuntilthedisplayashesandshowsamemoryspace.Anemptymemoryspaceis

indicated by “EMPTY”, an assigned space is shown with its frequency. You can also re-assign a memory

space which is already in use.

• Press the

TUN+

TUN-

buttons to select a memory space.

•Conrmsaveusingthe

Enter

button. “STORED”ashesbrieyonthedisplay.

• The stations can now be selected with the or buttons.

FM menu functions

The

button opens a menu in which different FM functions can be set. The menu can be scrolled

through using the

TUN+

TUN-

buttonsandthedesiredmenupointcanbeconrmedwiththe

Enter

button. The following functions can be set:

• SCAN SET: With this you can set which station should be considered for automatic storage during the station

scan. The settings which are possible are “ALL” (all stations which can be received) or “Strong” (only the stron-

gest stations). The selection is made

TUN+

with the

TUN-

orbuttonsandconrmedwiththe

Enter

button.

• AUD SET: Setting for “Mono” or “Stereo” reception. The selection is made with the

TUN+

TUN-

buttonsandconrmedwiththe

Enter

button.

• SYSTEM: For customer service only!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood M-819DAB Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood M-819DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info