Bedienungsanleitung Kenwood NX-5900B (Seite 6 von 48) (Englisch, Französisch, Spanisch)

606372

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

The AMBE+2

voice coding Technology embodied in this product is protected by intellectual

property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc.

This voice coding Technology is licensed solely for use within this Communications Equipment.

The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile,

reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code

into a human-readable form. U.S. Patent Nos. #6,199,037, #6,912,495, #8,200,497, #7,970,606,

and #8,359,197.

Firmware Copyrights

The title to and ownership of copyrights for firmware embedded in KENWOOD product memories are

reserved for JVC KENWOOD Corporation.

PRECAUTIONS

Observe the following precautions to prevent ﬁ re, personal injury, and transceiver

damage.

• Do not attempt to conﬁ gure the transceiver while driving; it is too dangerous.

• Do not disassemble or modify the transceiver for any reason.

• Do not expose the transceiver to long periods of direct sunlight, nor place it near heating

appliances.

• If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver

power off immediately, and contact your KENWOOD dealer.

• Use of the transceiver while you are driving may be against trafﬁ c laws. Please check and

observe the vehicle regulations in your area.

• Do not use options not speciﬁ ed by KENWOOD.

• Do not put the plastic bag used for packing of this equipment on the place which reaches a small

child's hand. It will become a cause of suffocation if it wears ﬂ atly.

• Do not place the transceiver on unstable surfaces.

• Keep the volume as low as possible to protect your hearing.

• Always switch the transceiver power off before installing optional accessories.

• To dispose of batteries, be sure to comply with the laws and regulations in your country or region.

• The transceiver operates in 12 V negative ground systems only! Check the battery polarity and

voltage of the vehicle before installing the transceiver.

• Use only the supplied DC power cable or a KENWOOD optional DC power cable.

• Do not cut and/or remove the fuse holder on the DC power cable.

• Do not place the microphone cable around your neck while near machinery that may catch the

cable.

For passenger safety, install the transceiver securely using the supplied or optional mounting

bracket and screw set so the transceiver will not break loose in the event of a collision.

When using the Transceiver, refer to the “NOTICES TO THE USER” and “PRECAUTIONS”. If the

warnings are not observed, there may be the possibility to have any malfunction. In this case, press

and hold the Power Switch for 5 seconds or more. If the malfunction persists, ask your dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood NX-5900B Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info