Bedienungsanleitung Kenwood RA-5000 (Seite 54 von 60) (Englisch)

465280

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

RV-7000/RV-6000/RA-5000

Troubleshooting

Amplifier

Symptom Cause Remedy

No sound from the speakers. The speaker cords are disconnected. Connect it properly referring to <Connecting speakers>.

^ – (

VOLUME is set to the minimum position. Adjust the volume to a proper level.

MUTE is ON.

Turn OFF the MUTE. W

The SPEAKERS switches are set to OFF.

Set the SPEAKERS switch to ON. ﬂ

The input source selection is incorrect. Select the input source you want to play.

The input mode is not set properly. Select the optimum input mode by referring to

<Selecting the input mode>. ﬂ

Audio signal may not be output depending on the

connecting method and connected components.

Refer to the instruction manuals that come with the

connected components.

The standby indicator blinks and sound is not output. Speaker cords are short-circuited. Turn the power off, eliminate the short-circuiting, then

turn on the power again.

If the standby indicator still blinks after eliminating the

short-circuiting, there may be an internal defect. Switch it

off, unplug the power cord and call for service.

Sound is not output from one of the speakers. The speaker cord is disconnected. Connect it properly referring to <Connecting speakers>.

^ – (

The speaker is not set up correctly. Set it up properly referring to <Speaker setup>.

After setting, confirm that the test tone is output.

•ªº

Some speakers do not output audio depending on the

listen mode.

Sound is not output from the surround

speakers and/or the center speaker, or their sound is

very soft.

The surround speaker cords and/or the center speaker

cord is disconnected.

Connect it properly referring to <Connecting speakers>.

^ – (

The audio cannot be played in the desired signal format

(Dolby Digital or DTS).

Digital connection is necessary to play the Dolby Digital,

or DTS input signal in the input signal format.

Confirm that the input signal is connected to the

digital input or HDMI input terminal by referring to

<Connections>. $ – ¶

The player component is not set for digital output. Confirm the audio output setup of the player component

by referring to its instruction manual.

When playing a Dolby Digital or DTS source, the sound is

cut off soon after it starts.

There are many possible causes for this problem,

depending on the player used.

Set the input mode to "MANUAL" before starting playback

of the Dolby Digital or DTS source. ﬂ

No sound is produced during playback from a BD/DVD

player.

The input mode is set to "MANUAL".

Press the [INPUT MODE] key to select to "AUTO". ﬂ

A video source cannot be recorded normally. The software is copy-guarded. Copy-guarded video software cannot be recorded.

The audio of a digital broadcast cannot be switched. The audio of certain broadcasts cannot be switched with

this unit.

Switch the audio on the digital tuner.

Display is turned off. PURE AUDIO MODE is on. While the PURE AUDIO MODE is on, the display is turned

off. Turn off the PURE AUDIO MODE. °

This unit is turned OFF spontaneously. APS is ON.

Turn OFF the APS. ¤

Audio is not output when the TV input is selected. The TV is ARC-incompatible. Connect to the HDMI terminal of an ARC-compatible TV.

‡

The HDMI terminal is ARC-incompatible. Connect to the ARC-compatible HDMI terminal.

The HDMI Link is OFF.

Set the HDMI Link to ON. ›

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood RA-5000 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood RA-5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info