Bedienungsanleitung Kenwood TH-F7E (Seite 39 von 64) (Englisch)

511233

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

10 UTILIZING THE B-BAND

SELECTING A MODE FOR THE B-BAND

When using the B-band receiver, the following

receiving mode is available.

edoMgnivieceR segnaRycneuqerFelbaliavA

BSU/BSLzHk001 ≤ zHM074<f

WCzHk001 ≤ zHM074<f

MAzHk001 ≤ zHG3.1<f

MFzHk001 ≤ zHG3.1<f

MFWzHM7.92 ≤ zHG3.1<f

LSB/ USB/ CW/ AM/ FM/ WFM

To select the receiving mode for the B-band:

1 Press [VFO].

2 Press [A/B] to select the B-band.

3 Press [BAND], then turn the Tuning control or

press [ ]/ [ ] to select the desired frequency.

4 Press [F], [BAND] repeatedly until you select the

desired receiving mode. The mode icon cycles

from FM ➞ WFM ➞ AM ➞ LSB ➞ USB ➞ CW,

and then goes back to FM.

Note:

◆

“FMN” appears in place of “FM” when you select “ON” for the

Menu No. 29 (FM NARROW) {page 39}.

◆

Select “WFM” when you receive the audio signal of the

broadcasting stations, such as FM or TV stations.

◆

If the Fine Tuning function is ON {page 35}, you cannot select FM

mode (FM/ NFM/ WFM). To select FM mode, turn the Fine

Tuning function OFF.

BAR ANTENNA

Although the supplied wide-band helical antenna is

used for receiving B-band frequencies, due to the

size and length limitation, it may not be suitable for

low HF band (below 10.1 MHz) reception. The

transceiver features a built-in bar antenna for the

reception frequency below 10.1 MHz. The

transceiver automatically switches to the bar antenna

when you select a frequency below 10.1 MHz for the

B-band. However, you can connect an external

antenna to the antenna connector instead.

To disable the built-in bar antenna below 10.1 MHz:

1 Press [MNU].

2 Turn the Tuning control or press [ ]/ [ ] to select

Menu No. 26 (BAR ANT).

3 Press [ ] or [MNU].

4 Turn the Tuning control or press [ ]/ [ ] to select

“DISABLED”.

5 Press [ ] or [MNU] to store the setting.

Note: The bar antenna is embedded in the base of the transceiver,

horizontally. The antenna has the same characteristics as a dipole

antenna. If the target station’s signal is weak, rotate the transceiver

to find the best receiving position.

dnaB ycneuqerF petS edoM

dnabMA

zHk025~zHk001zHk5MA

zHM17.1~zHk025zHk01MA

zHM5.3~zHM17.1

zH001

)NOENIF(

zHM0.4~zHM5.3BSL

zHM0.7~zHM0.4MA

zHM3.7~zHM0.7BSL

zHM1.01~zHM3.7MA

zHM51.01~zHM1.01WC

zHM0.41~zHM51.01MA

zHM53.41~zHM0.41BSU

zHM860.81~zHM53.41MA

zHM861.81~zHM860.81BSU

zHM0.12~zHM861.81MA

zHM54.12~zHM0.12BSU

zHM98.42~zHM54.12MA

zHM99.42~zHM98.42BSU

zHM0.82~zHM99.42MA

zHM7.92~zHM0.82BSU

zHM0.64~zHM7.92zHk5MF

zHM0.05~zHM0.64zHk05WMF

zHM0.25~zHM0.05zHk01MF

zHM0.86~zHM0.25zHk05WMF

zHM5.78~zHM0.86zHk5MF

dnabMFzHM0.801~zHM5.78zHk05WMF

dnabriAzHM0.731~zHM0.801zHk52MA

zHM0.441~zHM0.731zHk5

MFzHM0.641~zHM0.441zHk5.21

zHM0.471~zHM0.641zHk5

VTFHVzHM0.032~zHM0.471zHk05WMF

m52.1zHM0.004~zHM0.032zHk5.21MF

zHM0.034~zHM0.004zHk5.21

mc07zHM0.044~zHM0.034zHk52MF

zHM0.074~zHM0.044zHk5.21

VTFHUzHM0.268~zHM0.074zHk05WMF

mc32

zHM0.0421~zHM0.268zHk5.21

zHM0.0031~zHM0.0421zHk52

■ B-band Frequency Coverage (TH-F7E)

Note: By default, the Fine Tuning function is activated automatically

for 1.71 MHz ~ 29.7 MHz.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TH-F7E Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TH-F7E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info