Bedienungsanleitung Kenwood TM-D710GA (Seite 19 von 77) (Englisch)

606707

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

SCAN-3

PROGRAM SCAN

Program Scan is identical to VFO Scan except that you select a

frequency range for the scan.

■ Setting Scan Limits

You can store up to 10 scan ranges in Memory channels L0/

U0 to L9/U9.

1 Press [VFO].

2 Select your desired band.

3 Rotate the Tuning control to select your desired

frequency for the lower limit.

4 Press [F].

• A memory channel number appears and blinks.

5 Rotate the Tuning control to select a channel from L0 to

L9.

6 Press [M.IN] to set the channel number.

• The lower limit is stored in the channel.

7 Rotate the Tuning control to select your desired

frequency for the lower limit.

8 Press [F].

9 Rotate the Tuning control to select a matching channel

number from U0 to U9.

• For example, if you select channel L3 in step 5, select

channel U3 here.

10 Press [M.IN] to set the channel number.

• The upper limit is stored in the channel.

• To conﬁ rm the stored scan limits, press [MR],

then select the L and U channels.

Note:

◆ The lower limit must be lower in frequency than the upper limit.

◆ The lower and upper frequency step sizes must be equal.

◆ The lower and upper limits must be selected on the same band.

■ Using Program Scan

1 Select your desired band.

2 Press [VFO].

3 Rotate the Tuning control to select a frequency within

your desired scan range.

4 Press [VFO] (1s).

• Scan starts at the current frequency.

• The 1 MHz decimal blinks while scanning is in progress.

• To reverse the scan direction, turn the Tuning control

clockwise (upward scan) or counterclockwise (downward

scan). You can also press microphone [UP]/ [DWN].

5 To quit Program Scan, press [VFO] again.

Note:

◆ If the step size differs between the lower limit and upper limit, VFO

scan will begin instead of Program Scan.

◆ If the current VFO frequency is within more than one Program Scan

range, the range stored in the smallest channel number is used.

MHz SCAN

MHz Scan monitors a 1 MHz segment of the band, using the

current frequency step size. The current 1 MHz digit determines

the limits of the scan. For example, if the current frequency is

145.400 MHz, then the scan range would be from 145.000 MHz

to 145.995 MHz (the exact upper limit depends on the current

frequency step size).

1 Select your desired band.

2 Press [VFO].

3 Rotate the Tuning control to select a frequency within your

desired 1 MHz range.

4 Press and hold the Tuning control for 1 second to start

scanning.

• Scan starts at the current frequency.

• The 1 MHz decimal blinks while scanning is in progress.

• To reverse the scan direction, turn the Tuning control clockwise

(upward scan) or counterclockwise (downward scan). You can

also press microphone [UP]/ [DWN].

5 To quit MHz Scan, press the Tuning control again.

CALL SCAN

Use Call Scan to monitor both the Call channel and either the

currently selected VFO frequency or the currently selected

Memory channel.

1 Select your desired VFO frequency or Memory channel.

2 Press [CALL] (1s) to start Call Scan.

• The 1 MHz decimal blinks while scanning is in progress.

• When scanning a Memory channel, the Call channel on the

same band as the selected Memory channel is used for scan.

3 To quit Call Scan, press [CALL] again.

Note: The Memory channel selected is scanned even if it has been locked out

of scan.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GA Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info