Bedienungsanleitung Kenwood TM-D710GE (Seite 18 von 77) (Englisch)

606708

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

SCAN-2

VFO SCAN

VFO Scan monitors all frequencies tunable on the band, using

the current frequency step size.

1 Select your desired band.

2 Press [VFO] (1s).

• Scan starts at the current frequency.

• The 1 MHz decimal blinks while scanning is in progress.

• To reverse the scan direction, turn the Tuning control clockwise

(upward scan) or counterclockwise (downward scan). You can

also press microphone [UP]/ [DWN].

3 To quit VFO Scan, press [VFO] again.

MEMORY SCAN

Use Memory Scan to monitor all Memory channels programmed

with frequency data.

1 Select your desired band.

2 Press [MR] (1s).

• Scan starts at the current frequency.

• The 1 MHz decimal blinks while scanning is in progress.

• To reverse the scan direction, turn the Tuning control clockwise

(upward scan) or counterclockwise (downward scan). You can

also press microphone [UP]/ [DWN].

3 To quit Memory Scan, press [MR] again.

Note:

◆ At least 2 Memory channels must contain data and must not be locked out

of scan.

◆ The L0/U0 to L9/U9 Memory channels will not be scanned.

◆ You can also start Memory Scan when in Channel Display mode. While

Scan is paused on a channel, the channel number blinks.

■ Locking Out a Memory Channel

You can select Memory channels that you prefer not to

monitor while scanning.

1 Press [MR], then rotate the Tuning control to select your

desired channel.

2 Enter Menu mode and access Menu 202.

3 Set the lockout to ON to lock the channel out of the

scanning sequence.

• To cancel lockout, set the lockout to OFF.

• The icon appears on the display for a channel

that has been locked out.

Note: The L0/U0 to L9/U9 Memory channels cannot be locked out.

GROUP SCAN

For the purpose of Group Scan, the 1000 Memory channels are

divided into 10 groups, with each group containing 100 channels.

Group Scan monitors only the 100 channels which belong to the

speciﬁ c group you are scanning. The channels are grouped as

follows:

Memory

Group

Channel

Range

Memory

Group

Channel

Range

0 0 ~ 99 5 500 ~ 599

1 100 ~ 199 6 600 ~ 699

2 200 ~ 299 7 700 ~ 799

3 300 ~ 399 8 800 ~ 899

4 400 ~ 499 9 900 ~ 999

1 Press [MR], then rotate the Tuning control to select a

channel in your desired group.

2 Press the Tuning control (1s).

• Scan starts at the current channel.

• The 1 MHz decimal blinks while scanning is in progress.

• To reverse the scan direction, turn the Tuning control clockwise

(upward scan) or counterclockwise (downward scan). You can

also press microphone [UP]/ [DWN].

3 To quit Group Scan, press the Tuning control again.

Note:

◆ At least 2 Memory channels in the selected group must contain data and

must not be locked out of scan.

◆ You can also start Memory Scan when in Channel Display mode. While

Scan is paused on a channel, the channel number blinks.

■ Memory Group Link

Memory Group Link provides you with the ability to link 2 or

more Memory channel groups together to act as a single

group when scanning. You can link up to 10 separate groups

together, or even add multiple instances of the same group

to the group link, to ensure that one group is scanned more

often than the other groups.

1 Enter Menu mode and access Menu 203.

2 Press the Tuning control.

• The cursor will begin blinking.

3 Rotate the Tuning control to select a group to link.

4 Press the Tuning control to set the group and move the

cursor to the right.

• Press [ ] to move the cursor back or [ ] to move the cursor

to the right.

5 Repeat steps 3 and 4 to link additional groups together.

6 When you have entered your desired groups, press [

] to move the cursor to the right, then press the Tuning

control to complete the entry and exit Menu mode.

• You can insert a character by pressing [INS].

• You can delete the selected character by pressing [CLR].

• If you have entered the maximum of 6 groups, simply press

the Tuning control to complete the entry and exit Menu mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GE Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info