Bedienungsanleitung Kenwood TM-D710GE (Seite 32 von 77) (Englisch)

606708

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

OTHER OP-5

PROGRAMMABLE FUNCTION KEYS

■ Transceiver Front Panel

There are 2 PF (Programmable Function) keys on the

transceiver front panel: PF1 and PF2. You can assign your

own desired functions to these 2 keys.

1 Enter Menu mode and access Menu 906 (PF1) and/or

Menu 907 (PF2).

2 Set your desired function for the key. Programmable

functions available are: WX CH (Weather Channel)/

FRQ.BAND (Frequency bands)/ CTRL (Control)/

MONITOR (Monitor)/ VGS (Voice recorder)/ VOICE (Voice

announcement)/ GROUP UP (Memory group up)/ MENU

(Menu mode)/ MUTE (Speaker Mute)/ SHIFT (Shift)/

DUAL (Dual Mode)/ M>V (Memory to VFO Copy)/ 1750

(1750 Hz Tone).

■ Microphone Keys

There are 4 microphone PF (Programmable Function) keys:

[PF] (PF1), [MR] (PF2), [VF0] (PF3) and [CALL] (PF4). You

can assign your own desired functions to these 4 keys.

1 Enter Menu mode and access Menu 908 (MIC.PF1) and/

or Menu 909 (MIC. PF2) and/or Menu 910 (MIC. PF3)

and/or Menu 911 (MIC. PF4).

2 Set your desired function for the key. Programmable

functions available are: WX CH (Weather Channel)/

FRQ.BAND (Frequency bands)/ CTRL (Control)/

MONITOR (Monitor)/ VGS (Voice recorder)/ VOICE (Voice

announcement)/ GROUP UP (Memory group up)/ MENU

(Menu mode)/ MUTE (Speaker Mute)/ SHIFT (Shift)/

DUAL (Dual Mode)/ M>V (Memory to VFO Copy)/ VFO/

MR/ CALL/ MHz/ TONE/ REV (Reverse)/ LOW/ LOCK/

A/B (Band Select A/ Band Select B)/ ENTER/ 1750 (1750

Hz Tone)/ M.LIST (Message list)/ S.LIST (Station list)/

MSG.NEW/ REPLY/ POS/ P.MONI/ BEACON/ DX/ WXi.

■ Frequency Direct Entry

If the desired operating frequency is far from the current

frequency, using the microphone keypad is the quickest way to

change the frequency. One of the microphone PF keys must

ﬁ rst be programmed as [ENTER].

1 Press the left or right [BAND SEL] to select band A or B,

then press [VFO] or [CALL].

2 Press the key programmed as [ENTER].

• The Direct Frequency Entry display appears.

3 Press the microphone keys ([0] ~ [9]) to enter your desired

frequency.

4 To set the entered frequency, press [ENTER] or [VFO].

• Pressing [ENTER] before entering all of the digits will set the

remaining digits to 0.

• Pressing [VFO] before entering all of the digits will leave the

remaining digits at their previous values.

• Entering all digits for a frequency will automatically set the

frequency without pressing [ENTER] or [VFO].

• If you need to only change the MHz digit, press the Tuning

control, then enter the new value.

KEY LOCK

The Key Lock function ensures that your transceiver settings

will remain unchanged if you accidentally press a key. When

activated, the following functions can still be used:

• [ ]

• [PTT]

To turn Key Lock ON or OFF, press [F] (1s).

• When Key Lock is activated, the icon will appear on the

display.

■ Microphone Key Lock

The Microphone Key Lock function will lock the microphone

PF (Programmable Function) keys.

1 Enter Menu mode and access Menu 912.

2 Turn the Microphone Key Lock function ON or OFF.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GE Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info