Bedienungsanleitung Kenwood TM-D710GE (Seite 48 von 77) (Englisch)

606708

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

APRS-3

RECEIVING APRS DATA

Each time a new APRS packet is received, the frequency display

is interrupted to show information as below:

Status text

• The received APRS packet may include information on an object

such as a hurricane or tornado. In this case, the name of the object

appears instead of a callsign.

• Press [MSG] to send a message to the station.

• Press [DETAIL] to access further information.

• To restore the frequency display, press [ESC] or just wait for

approximately 10 seconds.

Note:

◆ When you receive an APRS packet including an “EMERGENCY” comment,

a different format of display from the above will appear and a different beep

will sound.

◆ When you receive an APRS position packet that you transmitted, the

frequency display is interrupted and “MY POSITION” will appear on the

display. This could happen when one or more digipeaters are used. (When

setting Menu No. 625 (DISPLAY AREA) to “ENTIRE”, “HALF”, or “OFF”, the

call sign of the digipeater station will not display.)

◆ If you receive a message that you transmitted, “MY MESSAGE” will appear.

• You can change the interrupt screen display setting through Menu

No. 625 (DISPLAY AREA). When set to “OFF”, the frequency display

is not interrupted. An indicator such as “dP” appears, depending on

the type of data. Refer to the table for details.

Indicator Meaning

dP Duplicate position comment

nP New position data

Other station position

data (Navitra beacon)

>P Beyond position limit

>F Beyond ﬁ lter type

aM ACK message

dM Duplicate message data

nM New message data

oM To other stations message data

rM Rejected Message

dS Duplicate status text

nS New status

Query

?? Packet that cannot be decoded

dD Duplicated DX cluster data

nD New DX cluster data

The transceiver automatically transmits the appropriate information in

approximately 2 minutes after receiving a request.

Note:

◆ The APRS programs for PCs have entry ﬁ elds for a position comment and

status text. The data entered to these two ﬁ elds are transmitted as separate

packets. This transceiver, however, includes both of a position comment and

status text in one packet to transmit.

◆ This transceiver beeps each time it receives any type of APRS packet. You

may access Menu 624 (AUDIO - RX BEEP) to change this setting. The

default is “ALL”.

ACCESSING RECEIVED APRS DATA

This transceiver is capable of receiving and storing APRS data

received from up to 100 stations in memory. You can easily recall

the information of the desired station.

1 Press [KEY], [LIST].

• The list of stations appears.

• The numbers beside the callsigns indicate the order in which data is

received. The data received last is assigned 1.

[TOP]: Displays the list of the fast 5 stations.



]: Displays the list of the previous 5 stations.



]: Displays the list of the next 5 stations.

[ESC]: Restores the frequency display.

[MSG]: Allows message entry to the current station.

[SORT]: To select the sort function.

[FILTER]: To select the ﬁ lter function.

[TUNE]: Set the QSY frequency (APRS only).

[CLR]: Deletes the current station.

• Press [F].

[POS.RQ]: Request position.

[ALLCLR]: Deletes all stations.

• When you press [ALLCLR], “CLEAR ALL?” appears with the

message. Press the Tuning Control to clear all.

2 Rotate the Tuning control to select the desired station using

the cursor (

3 Press the Tuning control.

• The information of the selected station appears.

[BACK]: Restores the list of stations.

[MSG]: Allows message entry to the current station.

[]: Displays the previous page.

[]: Displays the next page.

[TUNE]: Set the QSY frequency (APRS only).

[CLR]: Deletes the entire information of the current

station.

Note:

◆ When data from the 101st station is received, the oldest data in memory is

replaced by that data.

◆ Each time a new APRS packet is received from the same station, the old

data from that station (in memory) is replaced by new data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GE Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info