Bedienungsanleitung Kenwood TM-D710GE (Seite 52 von 77) (Englisch)

606708

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

APRS-7

ENTERING A MESSAGE

To transmit a message, ﬁ rst enter the callsign of the target

station. To transmit a bulletin, enter “BLN#” instead; where # must

be 0 to 9 or A to Z. When the length of your bulletin exceeds 64

digits, you may transmit more than one packet to send the entire

bulletin. Use # to indicate the sequence of the bulletin portions.

For example, enter “BLN0” (or “BLNA”) to send the ﬁ rst packet,

then “BLN1” (or “BLNB”) to send the second packet.

1 Press [KEY], [MSG].

2 Press [NEW], [REPLY], or [F], [EDIT].

• Select [EDIT] to edit the contents of received or transmitted

messages, or to edit the address of where to send the message.

• The display for entering a callsign appears; the ﬁ rst digit blinks.

(When you press [REPLY] or [EDIT], not necessarily)

[BACK]: Cancels entry of a callsign.

[]: Causes the cursor to move backward.

[INS]: Inserts the currently selected character.

[CLR]: Deletes the digit at which the cursor is blinking.

3 Rotate the Tuning control to select the ﬁ rst digit.

• You can enter 0 to 9, A to Z, and –.

4 Press the Tuning control.

• The cursor moves to the next digit.

5 Rotate the Tuning control to complete the setting.

• The display for entering a message appears; the ﬁ rst digit blinks.

[SPACE]: Inserts a space

• To copy a message, enter message compilation mode, press

[F] to enter function mode, then press [PASTE1], [PASTE2],

[PASTE3], [PASTE4], [PASTE5], [PASTE6], [PASTE7], or

[PASTE8] to copy the message that has been set up for each

key.

[NEXT]: Displays the next page ([PASTE5] ~ [PASTE8]).

[ALLCLR]: Clears all digits and backs the cursor to the ﬁ rst digit.

6 Rotate the Tuning control to select the ﬁ rst digit.

• You can enter alphanumeric characters plus special ASCII

characters.

7 Press the Tuning control.

• The cursor moves to the next digit.

8 Repeat steps 6 and 7 to enter up to 67 digits.

9 Press the Tuning control to complete the setting.

The keypad on the microphone also is available to enter

alphanumeric characters in steps 3 and 6.

ACCESSING RECEIVED APRS MESSAGES

This transceiver is capable of storing a maximum of 100

messages in memory. You can easily access one of those.

1 Press [KEY], [MSG].

• The newer message the smaller number assigned; the latest

message is assigned 1.

[POS]: Displays the latest position data of the current

station, if stored in memory.

2 Rotate the Tuning control to select the desired message

using the cursor (s).

3 Press the Tuning control.

• If you select an incoming message, the following display appears:

[BACK]: Restores the list of messages.

[NEW]: Create a new message.

[REPLY]: Responds to the party from whom you received.

Enters into message setting.

[SEND]: Messages in the list that have not been sent are

transmitted.

[POS]: The position data of the transmitting station is

displayed (if the station data is available).

[COPY]: Copies the GPS position data to Menu No. 605 (MY

POSITION).

[N/H]: Switches between North up and Heading up.

[

SET]: Sets the date and time from the GPS receiver to

the internal clock.

[CLR]: Deletes the current message.

• If you select one of your outgoing messages, the following

display appears:

[BACK]: Restores the list of messages.

[NEW]: Create a new message.

[EDIT]: Allows you to edit the transmitted message.

[SEND]: All messages which can be transmitted will be

sent 1 time.

[RE-TX]: When pressed for a message assigned a period

(.), resets the retry counter to 5 more transmissions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GE Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info