511236
4
Zoom out
Zoom in
Vorherige Seite
1/107
Nächste Seite
ii
PrecaUtioNs
Observe the following precautions to prevent fire, personal injury, and transceiver
damage.
When operating mobile, do not attempt to configure the transceiver while driving; it is
too dangerous.
Do not transmit with high output power for extended periods. The transceiver may
overheat.
Do not disassemble or modify the transceiver for any reason, unless instructed by this
manual or by Kenwood documentation.
Do not expose the transceiver to long periods of direct sunlight, nor place it near heating
appliances.
Do not place the transceiver in excessively dusty, humid, or wet areas, nor on unstable
surfaces.
If an abnormal odor or smoke is detected coming from the transceiver, switch the
transceiver power off immediately, and contact a
Kenwood service station or your
dealer.
Use of the transceiver while you are driving may be against traffic laws. Please check
and observe the vehicle regulations in your area.
Do not use options not specified by
Kenwood.
u The transceiver is designed for a 13.8 V DC (±15%) power source! Never use a 24 V battery
to power the transceiver. Check the battery polarity and voltage of the vehicle before installing
the transceiver.
u Use only the supplied DC power cable or a Kenwood optional DC power cable.
u Do not insert metal objects into the cooling fan.
u Do not cut and/or remove the fuse holder on the DC power cable. Improper connections and/or
current surges may cause smoke or fire.
u For passenger safety, install the transceiver securely using the supplied mounting bracket and
screw set so the transceiver will not break loose in the event of a collision.
u Various electronic equipment in your vehicle may malfunction if they are not properly protected
from the radio frequency energy which is present while transmitting. Electronic fuel injection,
anti-skid braking, and cruise control systems are typical examples of equipment that may
malfunction. If your vehicle contains such equipment, consult the dealer for the make of
vehicle and enlist his/her aid in determining if they will perform normally while transmitting.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

kenwood-tm-v71e

Suche zurücksetzen

  • Hallo, ich kann den Repeater auftasten, aber es kommt keine Modulation durch. Was muss ich beachten? Eingereicht am 11-7-2022 12:55

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood TM-V71E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood TM-V71E

Kenwood TM-V71E Bedienungsanleitung - Deutsch - 106 seiten

Kenwood TM-V71E Bedienungsanleitung - Holländisch - 106 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info