Bedienungsanleitung Kenwood TS-2000E (Seite 36 von 150) (Englisch)

45743

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

BASIC COMMUNICATIONS

SSB TRANSMISSION

SSB is the most commonly-used mode on the HF

Amateur bands. Compared with other voice modes,

SSB requires only a narrow bandwidth for

communications. SSB also allows long distance

communications with minimum transmit power.

If necessary, refer to “OPERATING BASICS”,

beginning on page 18, for details on how to receive.

1 Select an operating frequency.

2 Press [LSB/ USB/ AUTO] to select either lower or

upper sideband mode.

• “LSB” or “USB” appears to show which

sideband is selected.

3 Press [MIC/ CAR] to activate the Microphone

Gain Adjust.

• The current gain level appears.

4 Press [SEND], or press and hold Mic [PTT].

• The MAIN band LED lights red.

• Refer to “VOX” {page 39} for information on

automatic TX/RX switching.

5 Speak into the microphone and adjust the

MULTI/ CH control so that the ALC meter reflects

your voice level but does not exceed the ALC limit.

• Speak in your normal tone and level of voice.

Speaking too close to the microphone or too

loudly may increase distortion and reduce

intelligibility at the receiving end.

• You may want to use the Speech Processor.

Refer to “SPEECH PROCESSOR” {page 40}

for details.

6 Press [SEND] or release Mic [PTT] to return to

receive mode.

• The MAIN band LED lights green or turns off,

depending on the MAIN SQL setting.

7 Press [MIC/ CAR] to quit the Microphone Gain

Adjust.

Refer to “COMMUNICATING AIDS”, beginning on

page 37, for information on additional useful

operation functions.

FM TRANSMISSION

FM is a common mode for communicating on VHF or

UHF frequencies. Many amateur radio operators use

their portable radios and mobile transceivers in FM

mode. You can also utilize repeaters to reach your

friends when they are outside your antenna

coverage. Although FM requires a wider bandwidth

when compared to SSB or AM mode, it has the finest

audio quality among these modes. When combined

with the full-quieting aspect of FM signals, which

suppress background noise on the frequency, FM can

be the best method for maintaining regular schedules

with your local friends.

If necessary, refer to “OPERATING BASICS”,

beginning on page 18, for details on how to receive.

1 Select an operating frequency.

2 Press [FM/ AM/ NAR] to select FM mode.

• “FM” appears.

3 Press [SEND], or press and hold Mic [PTT].

• The MAIN band LED lights red.

• Refer to “VOX” {page 39} for information on

automatic TX/RX switching.

4 Speak into the microphone in your normal tone

and level of voice.

• Speaking too close to the microphone or too

loudly may increase distortion and reduce

intelligibility at the receiving end.

• You can switch the Microphone Gain for FM

between “LOW”, “MID”, and “HIGH” by using

Menu No. 41. “LOW” is usually appropriate;

however, select high if other stations report that

your modulation is weak. The MULTI/ CH

control has no effect in FM mode.

5 Press [SEND] or release Mic [PTT] to return to

receive mode.

• The MAIN band LED lights green or turns off,

depending on the MAIN SQL setting.

Refer to “COMMUNICATING AIDS”, beginning on

page 37, for additional information on useful

operation functions.

Note: Microphone gain adjustment for SSB or AM has no effect in

FM mode. In FM mode, you must select “LOW”, “MID” or “HIGH” in

Menu No. 41.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-2000E Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info