Bedienungsanleitung Kenwood TS-2000E (Seite 53 von 150) (Englisch)

45743

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

SUB-RECEIVER

The TS-2000(X) transceiver is equipped with

2 independent receivers. The main transceiver can

receive from 30 kHz to the UHF band (or 1.2 GHz

band if the optional UT-20 is installed) while the sub-

receiver can receive signals in FM or AM mode on

the VHF (144 MHz) or UHF (430/ 440MHz) band.

You can assign the sub receiver to monitor the local

repeater activities or your club channel while you are

operating on the HF/ 50MHz or VHF/ UHF/ (Optional

1.2 GHz) bands with the main transceiver.

Since the TS-2000 also has a built-in TNC, you can

assign the sub-receiver to monitor the local DX

Packet Cluster channel activities without using an

external TNC. If a new DX station is reported to the

DX Packet Cluster, the transceiver automatically

displays the DX station data. If desired, you can

further transfer the DX frequency information to the

main tranceiver to watch and instantly make contact

with the DX station {page 53}.

TX BAND AND CONTROL BAND

In this manual, the frequency on the left of the display

is referred to as the MAIN band and the frequency on

the right is called the SUB band.

To understand how to control the MAIN band and

SUB band frequencies and functions, please note the

differences between the TX band and the Control

band, below.

TX BAND

Press [MAIN] to display the “ ” and “ ” icons on

the MAIN band. When “ ” is on the MAIN band

display, the MAIN band is currently selected as the

transmission band. You can use the MAIN band

frequency to transmit signals or to control the main

transceiver functions.

If you press [SUB], the “ ” and “ ” icons move to

the SUB band display. This means that the SUB

band is now selected as the transmission band and

controls the functions. You can use the SUB band

frequency to transmit signals or control the sub

receiver functions.

CONTROL BAND

On some occasions, you may need to adjust the

frequency and/ or functions for the band you are not

transmitting on. To do this, press [CTRL]. For

example, if both “ ” and “ ” are on the MAIN

band display, pressing [CTRL] will move “ ” to the

SUB band display. “ ” remains on the MAIN band

display. This allows you to continue transmitting on

the MAIN band while you adjust the functions of the

sub-receiver.

RECEIVING

ACTIVATING THE SUB-RECEIVER

Press the SUB AF control to switch the sub-receiver

ON or OFF. The orange LED above the SUB AF/ SQL

control lights when the sub-receiver is switched ON.

Note: When switching the sub-receiver ON or OFF, you may hear a

popping sound from the speaker. This is not a malfunction.

CONTROLLING THE SUB-RECEIVER

To control all the available functions of the sub-

receiver, press [SUB] to transfer the controls and

transmission capability to the sub-receiver. The “ ”

and “ ” icons move from the main transceiver to the

sub-receiver. When you press [SEND] or Mic [PTT],

the transceiver transmits on the SUB band frequency.

Or, if you would like to transmit and receive on the

MAIN band while adjusting the sub-receiver

functions, simply press [CTRL]. Only the “ ” icon

moves from the main transceiver display to the sub

display. The “ ” icon remains on the main

transceiver display. With this setup, you can continue

receiving and transmitting on the main transceiver

VFO frequencies while you are making adjustments

to the sub-receiver functions.

If you need to adjust only the frequency of the sub-

receiver, you can simply turn the RIT/ SUB control.

However, this works only when you are operating the

main transceiver without the RIT/ XIT functions.

When operating the main transceiver with the RIT/

XIT function, first switch OFF the RIT/ XIT function by

pressing [RIT/ CW TUNE] and/or [XIT/ ALT], or press

[CTRL] to move the controls to the SUB band. Then

turn the Tuning control, the MULTI/ CH control or the

RIT/ SUB control to adjust the SUB band frequency.

SELECTING A BAND

Press [SUB] or [CTRL] to assign the function

controls to the sub-receiver.

Press [+]/ [–] to select the 144 MHz or the

430/ 440 MHz band.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-2000E Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info