Bedienungsanleitung Kenwood TS-2000E (Seite 82 von 150) (Englisch)

45743

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

15 OPERATOR CONVENIENCES

The next table is an example of adding 4 frequency

points into memory. With this setup, the transceiver

selects AM mode below 1.62 MHz, CW mode from

1.62 MHz to 2.0 MHz, LSB mode from 2.0 MHz to

9.5 MHz, FM mode from 9.5 MHz to 53.0 MHz and

USB mode from 53.0 MHz to 60.0 MHz. If multiple

data contains the same frequency but a different

mode is entered into memory, the lowest numbered

memory channel is reflected as the Auto Mode.

.oNlennahC ataD edomgnitarepO

zHM26.1

zHM30.0

≤ <MA

zHM26.1

≤ <WC

zHM0.2

≤ <BSL

zHM5.9

≤ <MF

zHM0.35

≤ BSU ≤

zHM0.06

zHM0.2

zHM0.7

BSL

zHM5.9

BSL

•

zHM0.35

To activate the AUTO MODE function, press [FUNC],

[LSB/ USB/ AUTO].

BEEP FUNCTION

The Beep function provides you confirmation of entry,

error status, and malfunctions of the transceiver.

Although you can turn the beep function OFF by

accessing Menu No. 12, we recommend you leave it

ON in order to detect unexpected errors and

malfunctions.

You can also change the output level of the beeps by

accessing Menu No. 12 and selecting 1 to 9.

The transceiver generates Morse code to tell you

which mode is selected when you change operating

modes.

When you change operating Modes, the following

Morse code sounds:

edoM tuptuOedoCesroM

BSL··–·)L(

BSU–··)U(

WC·–·–)C(

R-WC·–··–·–)RC(

KSF·–·)R(

R-KSF·–··–·)RR(

NMA/MA–·)A(

NMF/MF·–··)F(

1 Press and hold [USB/ LSB/ AUTO]+[ ]

(POWER) to turn the transceiver ON.

2 Press [+] or [–] to select the band to add the

frequency points.

3 Select a memory channel number by turning the

MULTI/ CH control.

4 Turn the Tuning control to select a desired

frequency point to change the operating mode.

Or, press [ENT] to enter the desired frequency

point {page 37} using the numeric keys.

5 Press one of the mode keys to select the desired

operating mode.

• The selected mode appears on the main dot-

matrix display.

6 Repeat steps 4 and 5 until you have added all the

data.

7 Press [CLR] to store the data.

The table below shows the default Auto Mode

frequency points for the HF/ 50 MHz band. When

you activate the Auto Mode selection by pressing

[FUNC], [LSB/ USB/ AUTO], the transceiver

automatically selects the mode; LSB for frequencies

below 9.5 MHz and USB for frequencies greater than

or equal to 9.5 MHz.

.oNlennahC ataD edomgnitarepO

zHM5.9

BSL

zHM30.0

≤ <BSL

zHM5.9

≤ BSU ≤

zHM0.06

zHM5.9

BSL

zHM5.9

BSL

zHM5.9

BSL

•

zHM5.9

BSL

The table below is an example of how to add the

frequency point of 1.62 MHz/ AM into memory. With

this set up, the transceiver selects AM mode below

1.62 MHz, LSB mode from 1.62 MHz to 9.5 MHz and

USB mode from 9.5 MHz to 60.0 MHz.

.oNlennahC ataD edomgnitarepO

zHM26.1

zHM30.0

≤ <MA

zHM26.1

≤ <BSL

zHM5.9

≤ BSU ≤

zHM0.06

zHM5.9

BSL

zHM5.9

BSL

zHM5.9

BSL

•

zHM5.9

BSL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-2000E Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info