Bedienungsanleitung Kenwood TS-480SAT (Seite 35 von 104) (Englisch)

511243

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

BASIC COMMUNICATIONS

SSB TRANSMISSION

SSB is the most commonly-used mode on the HF

Amateur radio bands. Compared with other voice

modes, SSB requires only a narrow bandwidth for

communications. SSB also allows long distance

communications with minimum transmission power.

If necessary, refer to “OPERATING BASICS”,

beginning on page 18, for details on how to receive.

1 Select an operating frequency.

2 Press [MODE] until “USB” or “LSB” appears on

the operating mode display.

• If the desired sideband (“USB” or “LSB”) does

not appear, select the other sideband first.

Then, press [MODE] (1 s). The mode indicator

changes to your desired sideband.

• “USB” represents the upper sideband and

“LSB” represents the lower sideband.

Normally, USB is used for the communications

for 10 MHz and above. While LSB is used for

the frequencies below 10 MHz.

3 Press [MIC/ 5/ RF.G] to adjust the Microphone

gain.

• The current gain level appears on the sub-

display.

4 Press and hold Mic [PTT].

• The LED above the [MODE] key lights red.

• Refer to “VOX” {page 36} for information on

automatic TX/ RX switching.

5 Speak into the microphone and turn the

MULTI control so that the ALC meter reflects your

voice level but does not exceed the ALC limit.

• Speak in your normal tone and level of voice.

Speaking too close to the microphone or too

loudly may increase distortion and reduce

intelligibility at the receiving end.

•You may want to use the Speech Processor.

Refer to “SPEECH PROCESSOR” {page 37}

for details.

6 Release Mic [PTT] to return to Reception mode.

• The LED lights green or turns off, depending

on the SQL control position.

7 Press [MTR/ CLR] or [MIC/ 5/ RF.G] to exit the

Microphone gain adjustment.

Refer to “COMMUNICATING AIDS”, beginning on

page 34, for information on additional useful

operation functions.

FM TRANSMISSION

FM is a common mode for communicating on VHF or

UHF frequencies. As for HF and the 6 m band,

29 MHz and 51-54 MHz bands are commonly used

for FM operation. You can also utilize 10 m/ 6 m band

repeaters to reach your friends when they are outside

or skipped over from your coverage. Although FM

requires a wider bandwidth when compared to SSB

or AM mode, it has the finest audio quality among

these modes. When combined with the full-quieting

aspect of FM signals, which suppress background

noise on the frequency, FM can be the best method

for maintaining casual communications with your

local friends.

If necessary, refer to “OPERATING BASICS”,

beginning on page 18, for details on how to receive.

1 Select an operating frequency.

2 Press [MODE] until “FM” appears.

• If “FM” does not appear, select “AM”, then

press [MODE] (1 s). The mode indicator

changes to “FM”.

3 Press and hold Mic [PTT].

• The LED lights red.

• Refer to “VOX” for information on automatic

TX/ RX switching {page 36}.

4 Speak into the microphone in your normal tone

and level of voice.

• Speaking too close to the microphone or too

loudly may increase distortion and reduce

intelligibility at the receiving end.

•You can switch the Microphone gain for FM

between 1 (Normal), 2 (Medium), and 3 (High)

by using Menu No. 44. 1 (Normal) is usually

appropriate; however, select 3 (High) if other

stations report that your modulation is weak.

5 Release Mic [PTT] to return to Reception mode.

• The LED lights green or turns off, depending

on the SQL control position.

Refer to “COMMUNICATING AIDS”, beginning on

page 34, for additional information on useful

operation functions.

Note:

Microphone gain adjustment for SSB or AM has no effect in

FM mode. In FM mode, you must select 1 (Normal), 2 (Medium), or

3 (High) in Menu No. 44.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-480SAT Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-480SAT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info