Bedienungsanleitung Kenwood TS-590SG (Seite 13 von 96) (Englisch)

606692

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

GETTING ACQUAINTED 2

[21 (7)]

Press to select the 21 MHz band memory {page 11} or

enter keypad number 7.

[24 (8)]

Press to select the 24 MHz band memory {page 11} or

enter keypad number 8.

[28 (9)]

Press to select the 28 MHz band memory {page 11} or

enter keypad number 9.

[50 (0)]

Press to select the 50 MHz band memory {page 11} or

enter keypad number 0.

[CLR]

Press to exit from, abort, or reset various functions.

Press and hold to clear a memory channel {page 46}.

[ENT]

Press to enter your desired frequency using the

10-key keypad {page 29}.

—— D ——

[LSB/USB]

Press to select LSB or USB mode {page 11}.

[CW/FSK (REV)]

Press to select CW or FSK mode {page 11}. Press

and hold to select a sideband (CW/ CW-R or FSK/

FSK-R).

[FM/AM (FM-N)]

Press to select FM or AM mode {page 11}. Press and

hold to select Narrow FM mode.

[DATA]

Press to select a Data mode (LSB/ LSB-DATA, USB/

USB-DATA, FM/ FM-DATA, or AM-DATA) {page 11}.

In CW mode, Press to toggle the Morse Code

Decoder ON and OFF. Press and hold to enter the

threshold level adjustment mode for Morse Code

Decoder {page 38}.

[FINE (F.LOCK)]

Press to activate the Fine tuning function to allow

more precise tuning {page 30}. Press and hold to

activate the Frequency Lock function {page 56}.

—— E ——

Central (Tuning) control

Turn to select the desired frequency {page 12}. Use

the convenient ﬁ nger-tip cavity for continuous tuning.

Slide the lever underneath the Tuning control to the

left or right to adjust the torque level of the control.

Left makes the control light and right makes it heavy.

light

heavy

TX-RX LED

Lights red while transmitting and green when the

squelch opens while receiving.

—— F ——

[IF FIL]

Press to toggle between IF Filter A and IF Filter B

{page 40}. You can adjust the ﬁ lter bandwidth using

the LO/WIDTH and HI/SHIFT controls. Press and

hold [IF FIL] to momentarily display each setting value

of the current DSP ﬁ lter DSP ﬁ lter bandwidth {page

40}.

[NB (LEV)]

Press to cycle through Noise Blanker 1, Noise Blanker

2, and OFF. Press and hold to adjust the Noise

Blanker level {page 42}.

[NR (LEV)]

Press to cycle through the DSP Noise Reduction

types: NR1, NR2, or OFF {page 41}. When the Noise

Reduction function is turned ON, press and hold

to change the parameters of the Noise Reduction

function {page 42}.

[BC (A.NOTCH)]

Press to select the DSP Beat Cancel function, BC1

(Beat Cancel 1), BC2 (Beat Cancel 2) or OFF

{page 41}. Press and hold to toggle the Auto

Notch Filter ON and OFF {page 41}.

[NOTCH (WIDE)]

Press to toggle the IF Notch Filter ON or OFF

{page 41}. Press and hold to set up the IF Notch

bandwidth {page 41}.

[SPLIT]

Press to enter split-frequency operation, allowing

you to use different transmission and reception

frequencies {page 24}. Press and hold to enter the

Split RX frequency setup mode.

[TF-SET]

During split-frequency operation, press to monitor or

change your transmit frequency {page 24}.

[A/B (A=B)]

Press to select either VFO A or VFO B {page 10}.

Press and hold to duplicate the data in the current

VFO to the other VFO {page 25}. While in Menu

mode, press to select Menu A or Menu B. While in

Program Memory Channel mode, press to recall the

start or end frequency.

[M/V]

Press to toggle between Memory and VFO modes.

[M.IN]

Press to enter Memory Scroll mode and to store data

to a Memory channel {page 43}.

[M>V]

Press to transfer the current Memory Channel

contents to the VFO.

[Q-M.IN]

Press to store data to the Quick Memory {page 46}.

[Q-MR]

Press to recall data from the Quick Memory {page 47},

while in VFO mode. Press to enter Memory Name

Edit mode, while in Memory Channel mode {page 46}.

[MHz]

Press to turn the MHz Up/ Down function ON or OFF.

The MHz digit increases or decreases when you turn

the MULTI/CH control. In Menu mode, press to turn

the Quick Menu ON or OFF {page 14}.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-590SG Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-590SG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info