683161
5
Zoom out
Zoom in
Vorherige Seite
1/196
Nächste Seite
Precautions
Please observe the following precautions to prevent fire, personal
injury, and transceiver damage:
Connect the transceiver only to a power source as described in
this manual or as marked on the transceiver itself.
Route all power cables safely. Ensure the power cables can
neither be stepped upon nor pinched by items placed near or
against the cables. Pay particular attention to locations near AC
receptacles, AC outlet strips, and points of entry to the
transceiver.
Take care not to drop objects or spill liquid into the transceiver
through enclosure openings. Metal objects, such as hairpins or
needles, inserted into the transceiver may contact voltages
resulting in serious electrical shocks. Never permit children to
insert any objects into the transceiver.
Do not attempt to defeat methods used for grounding and
electrical polarization in the transceiver, particularly involving
the power input cable.
Adequately ground all outdoor antennas for this transceiver
using approved methods. Grounding helps protect against
voltage surges caused by lightning. It also reduces the chance
of a buildup of static charge.
.
POWER SERVICE
GROUNDING ELECTRODE
SYSTEM
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMPS
GROUNDING
CONDUCTORS
ANTENNA
DISCHARGE UNIT
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
EXAMPLE OF ANTENNA GROUNDING
Minimum recommended distance for an outdoor antenna from
power lines is one and onehalf times the vertical height of the
associated antenna support structure. This distance allows
adequate clearance from the power lines if the support structure
fails for any reason.
Locate the transceiver so as not to interfere with its ventilation.
Do not place books or other equipment on the transceiver that
may impede the free movement of air. Allow a minimum of 10
cm (4 inches) between the rear of the transceiver and the wall
or operating desk shelf.
Do not use the transceiver near water or sources of moisture.
For example, avoid use near a bathtub, sink, swimming pool, or
in a damp basement or attic.
The presence of an unusual odor or smoke is often a sign of
trouble. Immediately turn the power OFF and remove the power
cable. Contact a KENWOOD service station or your dealer for
advice.
Locate the transceiver away from heat sources such as a
radiator, stove, amplifier or other devices that produce
substantial amounts of heat.
Do not use volatile solvents such as alcohol, paint thinner,
gasoline, or benzene to clean the cabinet of the transceiver. Use
only a clean cloth with warm water or a mild detergent.
Disconnect the input power cable from the power source when
the transceiver is not used for long periods of time.
Remove the transceiver’s enclosure only to do accessory
installations described in this manual or accessory manuals.
Follow provided instructions carefully, to avoid electrical
shocks. If unfamiliar with this type of work, seek assistance from
an experienced individual, or have a professional technician do
the task.
Enlist the services of qualified personnel in the following cases:
a) The power supply or plug is damaged.
b) Objects have fallen into or liquid has spilled into the
transceiver.
c) The transceiver has been exposed to rain.
d) The transceiver is operating abnormally or performance has
seriously degraded.
e) The transceiver has been dropped or the enclosure
damaged.
Do not place the unit in excessively dusty and/or humid areas,
nor on unstable surfaces.
HF/ 50/ 70 MHz mobile antennas are larger and heavier than
VHF/ UHF antennas. Therefore, use a strong and rigid mount
to safely and securely install the HF/ 50/ 70 MHz mobile
antenna.
Do not put the plastic bag used for packing of this equipment
on the place which reaches a small child’s hand. It will become
a cause of suffocation if it wears flatly.
Turn the transceiver power off in the following locations:
In explosive atmospheres (inflammable gas, dust particles,
metallic powders, grain powders, etc.)
About Liquid Crystal Display
Brightness of the LCD screen may appear uneven and flickering
may occur depending on the content displayed. This is not a
malfunction.
The LCD is manufactured using high-density technology to
achieve more than 99.99 % of effective pixels. Less than
0.01 % of the pixels may not be lit or may remain lit all the time.
This is not a malfunction.
When using this product in a cold region or when the
temperature of this unit or its surroundings is extremely low, it
may take a few minutes for the LCD to reach the normal level
of brightness after turning on the power. This is not a
malfunction. When this occurs, turn off the power and allow the
surrounding environment to reach the ambient temperature
(10 to 30 or 32°F to 86°F) before using the unit.
If you accidentally damaged the LCD display and the liquid in
the LCD display splashes and gets into your eyes or mouth,
rinse thoroughly with water immediately and seek medical
attention. And if the liquid splashes on your clothes or skin, wipe
off immediately with alcohol etc. Leaving it as is will harm your
skin or damage your clothes.
BEFORE USING
iii
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood TS-890S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood TS-890S

Kenwood TS-890S Bedienungsanleitung - Deutsch - 196 seiten

Kenwood TS-890S Bedienungsanleitung - Holländisch - 196 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info