683161
31
Zoom out
Zoom in
Vorherige Seite
1/196
Nächste Seite
Area Display Description
Refer
to
.
.
This is an icon of the internal memory. The icon blinks when writing image data to the built-in memory
during screen capture. The icon is displayed in red when the remaining space is running low.
16-6
.
The icon starts to blink when a USB flash drive is connected, and lights up when the USB flash drive
is recognized by this transceiver. The icon blinks when writing image data to the USB flash drive
during screen capture.
The icon is displayed in red when the remaining space is running low.
11-2
16-6
.
Appears when the timer function is enabled. 14-4
.
Appears when a KNS user is connected to this transceiver. 15-2
.
Displays the selected RX filter (A, B or C). 6-1
.
Displays the low cutoff frequency of the RX filter.
Displays the WIDTH frequency of the RX filter.
6-3
.
Displays the bandwidth of the RX filter.
.
Displays the high cutoff frequency of the RX filter.
Displays the shift frequency of the RX filter.
.
Displays the position of the notch frequency when the notch filter is ON. 6-8
.
Displays the IF filter passband.
Displays the audio spectrum of the RX or TX audio.
6-1
8-5
.
Displays the center indicator.
Indicates the pitch frequency when in the CW mode.
Indicates the center frequency of the passband when in the FSK or PSK mode.
Indicates the center frequency of the horizontal axis that is currently displayed when in the SSB,
FM or AM mode.
5-9
5-17
5-22
.
Displays the selected bandwidth for the roofing filter. 6-2
.
.
Meter display
This can be switched to an analog or digital display.
Display of the information on the TX meter can be switched when an analog meter is displayed.
4-9
.
.
Appears when the auto mode is ON. 4-4
.
Appears when Noise Reduction 1 (NR1) is ON.
Appears when Noise Reduction 2 (NR2) is ON.
6-8
.
Appears when Noise Blanker 1 (NB1) is ON.
Appears when Noise Blanker 2 (NB2) is ON.
Appears when both Noise Blanker 1 and 2 are ON.
6-6
.
Appears when Beat Canceler 1 (BC1) is ON.
Appears when Beat Canceler 2 (BC2) is ON.
6-9
.
Appears when the notch filter is ON and “Wide” is selected for the bandwidth.
Appears when the notch filter is ON and “Middle” is selected for the bandwidth.
Appears when the notch filter is ON and “Narrow” is selected for the bandwidth.
6-8
.
Appears during split operation. 5-1
NAMES AND FUNCTIONS OF PARTS 2
2-11
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood TS-890S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood TS-890S

Kenwood TS-890S Bedienungsanleitung - Deutsch - 196 seiten

Kenwood TS-890S Bedienungsanleitung - Holländisch - 196 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info