Bedienungsanleitung Kenwood TS-890S (Seite 113 von 196) (Englisch)

683161

113

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

This transceiver comes with 120 memory channels, each of which

can be used for registering operating data.

The 120 memory channels are divided into 3 types which are

assigned respectively with the following channel numbers: 00 to

99, P0 to P9 and E0 to E9. Below is a general outline of the

respective memory channel types.

00 to 99 (standard memory channels):

For registering operating data that are frequently used.

P0 to P9 (memory channels for specific band

segments):

For registering programmable VFO or program scan frequency

ranges.

E0 to E9 (expanded memory channels):

These can be used in the same way as the standard memory

channels.

Data that can be registered in each of the memory channels are

as follows.

Operating Data

Channel

00 to 99/

E0 to E9

P0 to P9

RX Frequency Yes

Yes

(Simplex)

TX Frequency Yes

RX Mode Yes

Yes

(Simplex)

TX Mode Yes

Split Operation Yes No

Start Frequency No Yes

End Frequency No Yes

Tone/CTCSS/Cross Tone Yes Yes

Tone Frequency Yes Yes

CTCSS Frequency Yes Yes

Memory Name Yes Yes

Lockout Yes Yes

Displaying the Memory Channel List

Settings registered in a memory channel can be displayed on the

Memory Channel List screen. The channel for registering

operating frequency data or the channel to use can be selected on

the Memory Channel List screen.

Memory channels can be assigned with names on this screen.

A memory channel can be selected on the Memory Channel List

screen.

1 Press F7 [M.LIST] to display the Memory Channel

List screen.

•

The selected memory channel is indicated in white color.

When registering data to the memory channel, it changes

into a pink display.

•

Pressing F7 [EXTEND] enlarges the Memory Channel List

screen display. Pressing it again restores the screen to the

original size.

Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]

control to select a memory channel.

Operating frequency data that are displayed on the Memory

Channel List screen are as follows.

Operating Data

Description

Displays the channel number.

00 to 99: standard memory channels

P0 to P9: memory channels for specific band

segments

E0 to E9: expanded memory channels

Frequency 1

Registers a single frequency and mode for simplex

channels. (Simplex operation frequency or radio

station frequency)

Registers the RX frequency and mode during split

operation for split channels.

Registers the start frequency and mode of a band

segment for memory channels assigned to

specific band segments.

Frequency 2

This is left blank in the case of simplex channels.

Registers the TX frequency and mode during split

operation for split channels.

Registers the end frequency and mode of a band

segment for memory channels assigned to

specific band segments.

Name Displays the name of the memory channel.

Lockout

Displays the lockout status of the respective

memory channels. Memory scan is not performed

for channels selected with a check mark.

MEMORY CHANNELS 9

9 MEMORY CHANNELS

9-1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-890S Seite 113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-890S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info