Bedienungsanleitung Kenwood TS-890S (Seite 116 von 196) (Englisch)

683161

116

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Configuring the Program Scan Frequency

Range

The frequency range for programmable VFO or program scan can

be registered to the memory channels from P0 to P9. Register the

start frequency and end frequency in advance to enable changes

to the frequency or scanning operation within a specific range.

For more details on program scan, please refer to Chapter 10.

1 When in the VFO mode, turn the Tuning or

[MULTI/CH] control to align the VFO frequency with

the frequency at which to start scanning.

Press [ M.IN] to display the Memory Channel List

screen.

Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]

control to select the memory channel (P0 to P9) for

registering the frequency range.

Press F4 [M.IN] or [ M.IN] to register the start

frequency.

The start frequency is registered to “Frequency 1”.

5 Turn the Tuning or [MULTI/CH] control to align the

VFO frequency with the end frequency.

Press F4 [M.IN] or [ M.IN] to register the end

frequency.

The end frequency is registered to “Frequency 2” and the

transceiver exits the Memory Channel List screen.

Erasing Memory Channels

Data from a registered memory channel can be erased.

1 Press F7 [M.LIST] to display the Memory Channel

List screen.

Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]

control to select a memory channel to be erased.

3 Press and hold F4 [(CLEAR)] to erase the operating

data.

●

When the operating data of a memory channel is erased

during operating in the memory channel mode, the

corresponding channel number will be maintained but

there will be no registered data inside.

●

To erase all the memory channels, perform memory

channel reset.

Registering a Memory Channel Name

Each memory channel can also be assigned with a name. The

name should contain not more than 10 characters (alphanumeric

characters and symbols).

1 Press F7 [M.LIST] to display the Memory Channel

List screen.

Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]

control to select the memory channel to be named.

3 Press F4 [NAME].

4 Use the function keys, [MULTI/CH] control or USB

keyboard to enter a name.

•

Enter a name that contains not more than 10 characters.

Key Behavior

F1 [SPACE] Inserts a space.

F2 [–]/ F3 [+] Selects a character.

F4 [ ]/ F5 [ ]

Moves the cursor.

F [BACK SPACE]

Deletes the character to the left of the

cursor.

F [DEL]

Deletes the character to the right of the

cursor.

F [CHAR]

Switches the type of character to edit.

Pressing the key each time switches the

selection in the following sequence:

ABC (upper case) → abc (lower case)

→ !”# (symbols) → ABC (upper case)

5 Press F6 [SAVE] to register the name.

•

Pressing F7 [CANCEL] returns the display to the Memory

Channel List screen without assigning a name to the

memory channel.

●

Characters that can be used are characters that can be

input using the keyboard selected in menu [9-01]

“Keyboard Language (USB Keyboard)”.

●

Quick memory channels cannot be assigned with a

name.

●

Only memory channels that contain registered operating

data can be assigned a name.

9 MEMORY CHANNELS

9-4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-890S Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-890S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info