683161
131
Zoom out
Zoom in
Vorherige Seite
1/196
Nächste Seite
Sending a Voice Message
A recorded voice message can be transmitted while it is being
played back.
1 Press F2 [TX MSG] to display the Voice Message
screen.
2 Press and hold the function key (F2 [CH 1] to F7 [CH
6]) corresponding to the channel that contains the
voice message to be transmitted.
A voice message playback screen is displayed, and the
voice message is transmitted.
.
Turning the [MIC/PITCH] control while transmission of a
voice message is in progress enables the gain level of the
microphone used exclusively for the voice message to be
adjusted.
The following operations are possible while a voice
message is being transmitted.
Operation
Behavior
Press F5
[REPEAT].
Plays back and transmits the voice message
repeatedly. Pressing F5 [REPEAT] again ends
repeat playback and transmission, and returns
this transceiver to the RX mode.
<<
>> lights up while repeat playback is
in progress.
The time interval for repeating the
transmission can be configured.
Press F4 [
STOP].
Stops transmission of the voice message and
closes the voice message transmission screen.
Press [ESC].
Closes the Voice Message screen and ends
transmission of the voice message.
Deleting a Voice Message
Follow the steps below to delete a recorded voice message.
1 Select a channel that contains the voice message
to be deleted.
.
2 Press and hold F7 [(DELETE)] to delete the selected
voice message.
Configuring the Time Interval for Repeated
Transmission
The time interval for repeating playback of a voice message can
be configured.
Configure in Menu [5-16]
CW/Voice Message
Retransmit Interval Time
Setting Value 0 to 10 (default) to 60 [s] (1 step)
Configuring to a larger value lengthens the playback interval.
Recording/Playing Voice Communication
This transceiver can be used to record voice communication or
play back the recordings.
Recording functions that can be used on this transceiver are as
follows.
Manual Recording
Voice recordings up to 9 hours per file can be stored in the built-
in memory of this transceiver. As the built-in memory is also
used by other functions, the maximum recording time varies
depending on the remaining space available.
Voice data up to 18 hours per file can be recorded when a USB
flash drive is used. If recording continues for a duration longer
than 18 hours per file, a new file will be created upon reaching
18 hours and recording will continue.
Full-time Recording
This recording function records the most recent voice data up to
the last 30 seconds to an audio file.
Timer Recording (USB Flash Drive Only)
This function records audio based on the preconfigured duration
and conditions. For more details on the timer recording operation,
please refer to “Timer” (14-4).
If DC power is turned off during recording, the saving of
the file recorded at that time is not guaranteed. To turn
off the power during recording, do so using [
] on the
front panel.
Manual Recording
The [
] and [ ] keys can be used to start or stop recording of
communication using this transceiver.
1
Press [ ] to start recording.
REC” appears on the screen and the [REC] LED lights
up.
.
2
Press [ ] to end the recording.
REC” disappears from the screen and the [REC] LED
light goes off.
When the remaining memory at the destination for
storing the file runs out while recording is in progress, a
“recording end” tone is output and the recording ends
automatically.
VOICE MESSAGE/AUDIO FILE 12
12-3
131

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood TS-890S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood TS-890S

Kenwood TS-890S Bedienungsanleitung - Deutsch - 196 seiten

Kenwood TS-890S Bedienungsanleitung - Holländisch - 196 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info