Bedienungsanleitung Kenwood TS-890S (Seite 148 von 196) (Englisch)

683161

148

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Configuring the Auxiliary Clock Time Zone

Follow the steps below to configure the time zone of the auxiliary

clock.

Select Clock Menu [03] “Timezone (Secondary

Clock)”.

2 Press F4 [SELECT].

3 Press F2 [–]/ F3 [+] or turn the [MULTI/CH] control

to select the time zone of the local clock.

Setting Value

UTC-14:00 to UTC+00:00 (default) to UTC

+14:00 (15min/step)

4 Press F6 [OK].

Registering an Auxiliary Clock Identifier

The auxiliary clock can be assigned with a single alphabet as an

identifier.

Select Clock Menu [04] “Secondary Clock

Identification Letter”.

2 Press F4 [EDIT].

3 Press F2 [–]/ F3 [+] or turn the [MULTI/CH] control

to select an identifier character.

•

“U” is used in the default setting, which stands for

“Coordinated Universal Time (UTC)”.

4 Press F6 [OK].

Configuring the Date Display Format

The date display format can be configured as follows.

Select Clock Menu [05] “Date Display Format”.

2 Press F4 [SELECT].

3 Select the preferred date display format.

Setting Value

MMM/DD/'YY (K type: default)/ DD/MMM/'YY

(E type: default)/ 'YY/MMM/DD

4 Press F6 [OK].

Configuring the Clock Display

Follow the steps below to configure the types and number of clocks

to display.

Select Clock Menu [06] “Clock Display”.

2 Press F4 [SELECT].

3 Select the preferred time display format.

Setting Value

Off/ Local Clock/ Secondary Clock/ Both

(default)

Off: Does not display the clock.

Local Clock: Displays only the local clock.

Secondary Clock: Displays only the secondary clock.

Both: Displays both the local clock and secondary clock.

4 Press F6 [OK].

Clock Correction Using NTP (Network Time

Protocol)

The NTP server can be used to correct the clock time

automatically. This is done by applying the date and time acquired

from the NTP server to the built-in clock of this transceiver.

The following configuration procedures are needed to make use

of the NTP function.

•

Connect this transceiver to a network such as a home LAN via

a LAN cable.

•

To make use of an NTP server on WAN, allow communication

to be established via the Network Time Protocol Port (port 123).

For a home LAN that uses a broadband router, ensure that port

123 of the broadband router is open.

•

Configure the network and IP address on this transceiver. For

more details on the method of configuration, please refer to

“LAN” (15-1).

•

Configure the address of the NTP server.

•

Configure the NTP server address of the time zone configured

for the local clock on this transceiver. For more details on the

method of configuration, please refer to “Configuring the NTP

Server Address” (14-3).

Displaying the Auto Correction Configuration Screen

1 Press [MENU] to display the menu screen.

2 Press F [CLOCK] to display the Clock menu screen.

•

If F [CLOCK] is not displayed, press F [MORE] to display F

[CLOCK].

Select Clock Menu [1] “Automatic Time

Correction”.

4 Press F4 [SELECT].

The auto correction configuration screen is displayed.

14 CLOCK DISPLAY/TIMER

14-2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-890S Seite 148

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-890S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info