Bedienungsanleitung Kenwood TS-890S (Seite 181 von 196) (Englisch)

683161

181

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

General Information

Your transceiver has been factory aligned and tested to specification before shipment. Under normal circumstances, the transceiver

will operate in accordance with these operating instructions. All adjustable trimmers, coils, and resistors in the transceiver are preset at

the factory. They should only be readjusted by a qualified technician who is familiar with this transceiver and has the necessary test

equipment. Attempting service or alignment without factory authorization may void the transceiver warranty.

When operated properly, the transceiver will provide years of service and enjoyment without requiring further realignment. The

information in this section gives some general service procedures requiring little or no test equipment.

Service

If it is ever necessary to return the equipment to your dealer or service center for repairs, pack the transceiver in its original box and

packing material. Include a full description of the problems experienced. Include both your telephone number and fax number (if

available) along with your name and address in case the service technician needs to call for further information while investigating your

problem. Don’t return accessory items unless you feel they are directly related to the service problem. Please do not send subassemblies

or printed circuit boards. Send the complete transceiver.

You may return your transceiver for service to the authorized KENWOOD dealer from whom you purchased it or any authorized

KENWOOD service center. A copy of the service report will be returned with the transceiver.

Tag all returned items with your name and call sign for identification. Please mention the model and serial number of the transceiver in

any communication regarding the problem.

Service Note

If you desire to correspond on a technical or operational problem, please make your note short, complete, and to the point. Help us help

you by providing the following:

•

Model and serial number of equipment

•

Question or problem you are having

•

Other equipment in your station pertaining to the problem

•

Meter readings

•

Other related information (Menu setup, mode, frequency, key sequence to induce malfunction, etc.)

●

Do not pack the equipment in crushed newspapers for shipment. Extensive damage may result during rough handling or

shipping.

●

Record the date of purchase, serial number, and dealer from whom the transceiver was purchased.

●

For your own information, retain a written record of any maintenance performed on the transceiver.

●

When claiming warranty service, please include a photocopy of the bill of sale or other proof-of-purchase showing the date of

sale.

Cleaning

The keys, controls, and case of the transceiver are likely to become soiled after extended use. Remove the controls from the transceiver

and clean them with a neutral detergent and warm water. To clean the case, use a neutral detergent (no strong chemicals) and a damp

cloth.

TROUBLESHOOTING 18

18 TROUBLESHOOTING

18-1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-890S Seite 181

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-890S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info