Bedienungsanleitung Kenwood TTM925 (Seite 3 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

510886

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

to use your toaster

1 Plug the toaster into the power

supply.

Move the browning control to the

desired setting. Use a low setting for

light toasting and for thin or dry

read.

3 Insert the bread, muffins, bagels etc.

4 Lower the lever ᕢ until it locks. The

‘cancel’ button will illuminate. (The

lever will not stay down unless the

toaster is plugged in).

5 To toast frozen bread, move the

browning control to the defrost

position .

●

To stop toasting at any stage, press

the ‘cancel’ button. Never lift the

lever to cancel toasting.

6 Your toast will pop up

automatically, to raise it higher, lift

the lever.

hints on using your

toaster

●

Select a lower setting for light

browning, for toasting one slice only

or for dry bread.

●

When toasting a single slice of

bread, you may notice a variation in

toast colour from one side to the

other - this is normal.

●

Dry/stale bread toasts more quickly

than fresh bread and thinly sliced

bread toasts more quickly than

thickly sliced bread. Therefore the

browning control should be set at a

lower setting than usual.

●

For best results ensure that the

bread slices are of an even

thickness, freshness and size.

●

In order to achieve uniform browning

we recommend you wait a minimum

of 30 seconds between each

toasting so that the control can

automatically reset. Alternatively

select a lower setting when

additional toasting is carried out.

●

Model TTM920/TTM925 For

best results larger slices of bread are

best positioned long ways in the

slot.

care and cleaning

1 Before cleaning, unplug your toaster

and let it cool down.

Slide out the crumb tray ᕣ. Clean,

then replace. Do this regularly:

crumbs can smoke or even burn.

Wipe the outside of the toaster with

a damp cloth, then dry. Do not use

abrasives.

service & customer care

●

If the cord is damaged it must, for

safety reasons, be replaced by

KENWOOD or an authorised

KENWOOD repairer.

If you need help with:

●

using your appliance or

●

servicing or repairs

Contact the shop where you bought

your appliance.

●

Designed and engineered by

Kenwood in the UK.

●

Made in China.

IMPORTANT INFORMATION FOR

CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE

WITH EC DIRECTIVE

2002/96/EC.

At the end of its working life, the product

must not be disposed of as urban

waste.

It must be taken to a special local

authority differentiated waste collection

centre or to a dealer providing this

service.

Disposing of a household appliance

separately avoids possible negative

consequences for the environment and

health deriving from inappropriate

disposal and enables the constituent

materials to be recovered to obtain

significant savings in energy and

resources. As a reminder of the need to

dispose of household appliances

separately, the product is marked with

a crossed-out wheeled dustbin.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TTM925 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info