Bedienungsanleitung Kenwood VR-507 (Seite 45 von 52) (Englisch)

40361

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Resetting the Microcomputer

The mrcrocomputer may malfunction (unit cannot be operated,

or shows an erroneous display) if the power cord IS unplugged

while the power IS ON, or due to some other external factor. If thus

happens, execute the followmg procedure to reset the mrcro-

computer and return the unit to its normal operating condition.

Please note that resetting the mrcrocomputer will clear the contents

of the memory and returns the unit to the state it was In when it left the

factor-y.

For U.S.A. and Canada

Unplug the power cord from the wall outlet, then plug it

back In while holding down the POWER key.

For other countrres

With the power cord plugged In, turn the POWER key

OFF Then, while holding down the ON/STANDBY key,

press POWER.

No sound from the speakers.

The speaker cords are disconnected.

VOLUME IS set to the mrnrmum position.

MUTE IS ON.

The SPEAKERS switches are set to OFF

The standby indicator blinks and sound

Speaker cords are short-crrcuited.

not output.

Sound is not output from one of the speakers.

The speaker cord IS disconnected.

Sound

not output from the surround

The surround speaker cords and/or the center

speakers and/orthe center speaker, ortheir

speaker cord IS disconnected.

sound

very small.

A surround mode has not been engaged.

. The surround and/or center volume controls are

set to the mrnrmum level.

A hummmg norse IS generated when the

PHONO input selector IS selected.

The audio cord from the turntable IS not con-

nected to the PHONO jacks.

The turntable IS not grounded.

When playing a Dolby Digital source signal

There are many possible causes for thus prob-

using a DVD player, the sound is cut off soon

lem, depending on the type of DVD player used.

after it starts.

No sound

produced during playback from

The Input mode IS set to digital manual.

a DVD player.

A video source cannot be recorded

normally.

The software IS copy-guarded.

Connect them properly refernng to “Connecting

the speakers”

-LIE!

Adjust the volume to a proper level.

Turn OFF the MUTE.

Set the SPEAKERS switch(es) to ON.

Turn the power off, elimrnate the short-crrcuit-

rng, then turn on the power agarn.

Connect it properly refernng to “Connecting the

speakers”

-Da

Connect it properly refernng to “Connecting the

speakers”

-m

Select a surround mode.

Adjust the speaker levels usrng the test tone.

-m

Insert the audio cord plugs securely into the

PHONO jacks.

Connect the grounding wrre to the GND termr-

nal on the rear panel.

Set the Input mode to digital manual before

starting playback of the Dolby Digital source.

-El

Press the INPUT MODE key to select to digital

auto mode.

-El

Copy-guarded vrdeo software cannot be re-

corded.

Radio stations cannot be received.

Interference.

A station which was preset cannot be re-

ceived by pressing the corresponding nu-

meric key.

No antenna IS connected.

Connect an antenna.

-(j-g

The broadcast band IS not set properly.

Set the broadcast band properly.

*The frequency of the desrred station IS not

Tune the frequency of the desrred station.

tuned.

-Ex

Norse due to Ignition norse from an automobile.

Install the outdoor antenna away from the road.

Norse due to Interference from an electric appli-

Turn off the power to the appliance.

ante.

Norse due to a nearby TV set.

Install the recerver farther away from the TV

The preset station belongs to a frequency that

Preset a station with a recervable frequency.

cannot be recerved.

The preset memory was cleared because the

Preset the station agarn.

power cord had been unplugged for a long

perrod of time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VR-507 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info