Bedienungsanleitung Kenwood VR-6050 (Seite 30 von 44) (Englisch)

40359

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Ambience effects

DVD 6-channel playback

Using a DVD player or the like equipped with six (5.1) output channels and

the receiver, you can enjoy surround sound playback.

When you try to play a disc other than Dolby Digital such as DTS CD, no

sound is produced or, noise may be heard. To avoid this situation, make

sure that you connect the component to the receiver’s DVD/6CH INPUT

jacks through a surround processor which can decode the surround

signal you want to listen to.

Connecting a DVD player which can decode the surround signal itself is

also acceptable.

INPUT MODE

DVD/6CH

INPUT MODE

VOLUME

DVD/6CH

VOLUME /

Preparations

• Connect your DVD player to the DVD/6CH jacks of the receiver.

• Turn on all other components that will be used.

• Complete “Preparing for surround sound”. *

Press “DVD/6CH” as the input source.

• If speaker system B is on when “DVD/6CH” is selected as the input

source, it switches off and speaker system A turns on automati-

cally.

Select "6CH INPUT" by pressing the INPUT MODE key.

Start playback of the DVD software.

Adjust the volume.

• It is not possible to adjust the volume level or sound quality (SET

UP, SOUND) of the channels separately when the receiver is in the

DVD/6CH mode. Adjust the volume with the controls of the DVD

player.

For the powered subwoofer, you can adjust the volume of the

subwoofer using the subwoofer’s own volume control.

Convenient functions

MULTI CONTROL

DIMMERSTEREO

SOUND LISTEN MODE

SOUND

LISTEN MODE%/ﬁ

STEREO

Joystick

(MULTI CONTROL5/∞,

DOWN2 /UP3)

DIMMER

Adjusting the sound

You can make further adjustments to the sound while listening to

playback in the surround mode.

1 Press the SOUND key and then use to the

keys or Joystick

(2/3) until the desired item appears in the display.

Each time you press the

keys or Joystick (2/3), the menu

changes as follows:

Note that some items are not displayed in certain modes.

1 CNTR (Center speaker level adjustment)*

2 SR (Right surround speaker level adjustment)*

3 SB (Surround back speaker level adjustment)*

4 SL (Left surround speaker level adjustment)*

5 SUBW (Subwoofer level adjustment)*

6 INPUT (Input level adjustment - analog mode only) ¡

7 MIDNIGHT

(Midnight mode ON/OFF - Dolby Digital mode only)

8 PANORAMA (Panorama mode

ON/OFF

)**

9 DIMENSION (Dimension adjustment)**

0 CENTER WIDTH (Center width adjustment)**

- CENTER FOCUS (Center focus adjustment)***

= CSII DLY (Rear speaker delay adjustment)***

~ CSII GAIN (Input gain adjustment)***

! TruBass (Trubass adjustment)***

* The adjustment is only temporary for the current input selection.

The value will return automatically to the original setup value

when the power is turned on/off or when the input selection is

changed.

** Pro Logic II Music mode only.

*** CS II mode only.

2 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the

setting as desired.

• The adjustment item is displayed for approximately 8 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VR-6050 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info