Bedienungsanleitung Kenwood VR-705 (Seite 5 von 32) (Englisch)

596379

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Before applying the power

For the U.S.A.

Note to CATV system installer

This reminder is provided to call the CATV system installer's attention

to Article 820-40 of the NEC that provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as close to the

point of cable entry as practical.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes

or modifications to this equipment may cause harmful interference

unless the modifications are expressly approved in the instruction

manual. The user could lose the authority to operate this equipment

if an unauthorized change or modification is made.

NOTE:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment may

cause harmful interference to radio communications, if it is not

installed and used in accordance with the instructions. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

– – Reorient or relocate the receiving antenna.

– – Increase the separation between the equipment and receiver.

– – Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

– – Consult the dealer or an experienced radio / TV technician for

help.

For the U.S.A.

Special features

True home theater sound

This receiver incorporates a wide variety of surround modes to bring you

maximum enjoyment from your video software. Select a surround mode

according to your equipment or the software you are going to play and

enjoy! £

Dolby Digital

The DOLBY DIGITAL mode lets you enjoy full digital surround from

software processed in the Dolby Digital format. Dolby Digital provides up

to 5.1 channels of independent digital audio for better sound quality and

more powerful presence than conventional Dolby Surround.

Dolby PRO LOGIC

DOLBY PRO LOGIC II, whilst totally compatible with its predecessor

PRO LOGIC, provides greater advantages in surround sound. It allows

user to enjoy the conventional stereo or Dolby Surround with a convincing

“5.1 like” presentation. PRO LOGIC II offers special features for controlling

the overall spatial, dimensionality and frontal sound field imaging. PRO

LOGIC II produces an impressive surround sound from video software

marked

and three-dimensional space from music CD.

When listening to music, you will be able to enjoy the experience of sheer

STEREO surround sound.

DTS

DTS (Digital Theater System) is a 5.1 channel digital audio format that

provides five full-spectrum channels and one low-frequency (subwoofer)

channel for unprecedented clarity, optimum channel separation and a

(wide) dynamic range.

In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or DVD

disc (carrying the “DTS” marking) can be played in Digital Surround.

Important:

When a DTS disc is played on a CD, LD or DVD player, noise may be

output from the analog output. It is recommended that you connect the

digital output of the player to the digital input of this unit.

DSP surround modes

The DSP (Digital Signal Processor) used for this receiver incorporates a

variety of high quality adjustable sound fields, like “ARENA”, “JAZZ

CLUB”, THEATER”, STADIUM” and “DISCO”. It is compatible with

almost any kind of program source.

DVD 6-channel input (For VR-715/KRF-V5070D only)

If you own a DVD player equipped with 6-channel output, this receiver

allows you to obtain the full surround sound impact of DVD source

material featuring multi-channel encoding. Since the source signals are

digital and each channel is input independently, the resulting ambience

is far superior to what can be achieved with conventional surround sound

systems.

ACTIVE EQ

ACTIVE EQ mode will produce a more dynamic sound quality in any

condition. You can enjoy a more impressive sound effect when ACTIVE

EQ is turned on during Dolby Digital and DTS playback.

IR (InfraRed) remote control

In addition to the basic receiver opeations, this IR remote control

supplied can also operate Kenwood cassette deck, MD recorder or CD

player which are connected using the system control cords.

This remote control can also control Kenwood DVD players directly

without using the DVD players’ remote control.

As an ENERGY STAR

Partner, Kenwood

Corporation has determined that this

product meets the

ENERGY STAR

guidelines for energy efficiency.This

product can save energy. Saving energy

reduces air pollution and lowers utility bills.

*5337/01-07/EN 27/12/02, 1:04 PM5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VR-705 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info