Bedienungsanleitung Kenwood XD-503 (Seite 2 von 60) (Englisch, Holländisch)

446117

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Preparation section

Before applying power

Caution : Read this page carefully to ensure safe operation.

For the United Kingdom

Factory fitted moulded mains plug

1.The mains plug contains a fuse. For replacement, use only

a 13-Amp ASTA-approved (BS1362) fuse.

2.The fuse cover must be refitted when replacing the fuse in

the moulded plug.

3.Do not cut off the mains plug from this equipment. If the

plug fitted is not suitable for the power points in your home

or the cable is too short to reach a power point, then obtain

an appropriate safety approved extension lead or adapter,

or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse

and dispose of the plug immediately, to avoid a possible

shock hazard by inadvertent connection to the mains

supply.

IMPORTANT: The wires in the mains lead are colored in

accordance with the following code:

Blue : Neutral

Brown : Live

Do not connect those leads to the earth terminal of a three-

pin plug.

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-

TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN

THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK

OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER

TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

CAUTION

*AC voltage selection

The AC voltage selector switch on the rear panel is set to

the voltage that prevails in the area to which the unit is

shipped. Before connecting the power cord to your AC

outlet, make sure that the setting position of this switch

matches your line voltage. If not, it must be set to your

voltage in accordance with the following direction.

AC voltage selector switch

Move switch lever to match your line voltage with a

small screwdriver or other pointed tool.

Note:

Our warranty does not cover damage caused by exces-

sive line voltage due to improper setting of the AC

voltage selector switch.

Inside this laser product, a laser diode classified as Class

3A laser radiation is contained as alerted by the internal

caution label shown above. To avoid exposure to laser

beams, do not open the cover.

The marking of products using lasers

(Except for some areas)

Units are designed for operation as follows.

Europe and U.K. ................................................. AC 230 V only

China.................................................................... AC 220 V only

*Other countries...........AC 110-120 / 220-240 V switchable

U.S.A. and Canada ............................................ AC 120 V only

Australia ............................................................. AC 240 V only

AC 220-

240V~

AC 110-

120V~

AC 220-

240V~

AC 110-

120V~

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN. AVOID EXPO-

SURE TO BEAM.

The marking is located on the rear panel and says that

the component uses laser beams that have been clas-

sified as Class 1. It means that the unit is utilizing laser

beams that are of a weaker class. There is no danger of

hazardous radiation outside the unit.

CLASS 1

LASER PRODUCT

The marking of products using lasers

(Except for some areas)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood XD-503 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info